The MIPS Malta is an ATX formfactor evaluation board made by MIPS Technologies. It supports a large variety of processor options; common processor types are 4Kc, 4KEc, 5Kc or a 24Kc core. The Malta board has four 32-bit PCI slots that are usually clocked at 33MHz and onboard Am79c970 PC-Net PCI Ethernet. It has Intel 82371AB PIIX4 (aka Southbridge) onboard which provides two PCI IDE (one for CompactFLASH socket), USB 1.1, and conventional PC-compatible peripherials : two i8259 IAC, i8254 timer, mc146818 RTC and CMOS e.t.c. The Malta has also a SuperIO chip behind a PIIX4 PCI/ISA bridge wich provides 16550 compatible DUART, LPT, floppy controller and PS/2 keyboard and mouse. The Malta can operate in big endian or little endian mode. This is accomplished by a BIGEND switch on the board.
Malta board may be equipped with various "core cards". A core card includes a CPU, a system controller (aka Northbridge) and SDRAM module.
|CoreLV||1||MIPS32 4K, MIPS64 5K||GT64120|
|CoreBonito64||2||QED RM5261, RM7061A||Bonito64|
|Core20K||3||MIPS64 20Kc, MIPS64 25Kf||Bonito64|
|CoreFPGA||4||MIPS32 4K, MIPS64 5K||GT64120|
|CoreFPGA2||7||.||MIPS SOC-it 101|
|CoreFPGA3||9||.||MIPS SOC-it 101|
Malta uses YAMON for it's firmware. YAMON determines various Core cards automatically.
The Malta is fully supported by Linux 2.4 and Linux 2.6. Since generally the main GIT tree on linux-mips.org is more geared towards development a separate Malta GIT repository that's geared towards absolute stability on Malta is being maintained by MIPS Technologies Inc.
GXemul supports MIPS Malta CoreLV (CORID=1) well enought to run unmodified Linux 2.4 and 2.6 kernels (except PCI and LAN stuff).
Qemu v0.9.0 also support MIPS Malta architecture.