Problems caused by non-Linux/MIPS toolchain
make: Entering directory `/usr/src/linux-mips/arch/mips/kernel' mips_4KC-gcc -D__ASSEMBLY__ -D__KERNEL__ -I/usr/eldk/usr/src/linux-mips/include -D_MIPS_SZLONG=32 -D_MIPS_SZPTR=32 -D_MIPS_SZINT=32 -g -G 0 -mno-abicalls -fno-pic -pipe -c -o entry.o entry.S entry.S: Assembler messages: entry.S:225: Error: unrecognized opcode `reg_s $8,164($29)' entry.S:226: Error: unrecognized opcode `reg_s $8,164($29)'
_MIPS_SZLONG etc. are normally defined by the gcc compiler driver. That is they should never be defined by the application itself. The precense of such kludgery usually indicates the use of a toolchain that wasn't configured for a Linux/MIPS target.
Ld dies with signal 6
collect2: ld terminated with signal 6 [Aborted]
This is a known bug in some very old binutils versions. You will have to upgrade to at least binutils 2.8.1 plus very current patches. With Linux 2.4 or newer binutils 188.8.131.52 or newer is probably recommended.
Linux 2.6 build fails early
$ make CHK include/linux/version.h HOSTCC scripts/basic/fixdep HOSTCC scripts/basic/split-include HOSTCC scripts/basic/docproc CC scripts/mod/empty.o gcc: cannot specify -o with -c or -S and multiple compilations make: *** [scripts/mod/empty.o] Error 1 make: *** [scripts/mod] Error 2 make: *** [scripts] Error 2
There are two possible causes for this failure known:
- Make sure you have set CONFIG_CROSSCOMPILE or add
CROSS_COMPILE=<target>to the make invocation.
- A few early Linux 2.6 kernels had a bug which would always result in this error message. In this case you really should upgrade.