Linux/MIPS supports a wide range of processors that differ slightly in many features. Kernels that support many different processor types are possible but such a kernel will be relativly large and slow compared to one that supports the bare minimum.
<asm/cpu-features.h> contains a number of macros that allow kernel code to be written in a way such that during compilation it will be optimized for a particular target platform.
- True if a processor has a TLB. Linux/MIPS does currently not support TLB-less processors.
- True if a processor has R4000-style exceptions.
- True if the CPU has an R4000-style TLB, that is a TLB where each entry maps two pages.
- True if the processor has a FPU.
- True if the processor supports the 32/32 model, that is it has 32 double precission registers.
- Set if the CPU has an R4000-style count / compare register.
- True if the processor has an R4000-style watch register. Linux does not really make use of this.
- True if the processor supports the MIPS16 extension.
- True if the processor supports a Nevada-style separate exception vector for interrupts.
- True if a processor has virtual coherency exceptions.
- True if the processor has a Create Dirty Exclusive cache operation for the D-cache. If this feature exists and a prefetch instruction exists also Linux will prefer the prefetch instruction.
- True if the processor has a Create Dirty Exclusive cache operation for the S-cache. If this feature exists and a prefetch instruction exists also Linux will prefer the prefetch instruction.
- True if the processor supports a prefetch instruction and the prefetch instruction actually delivers some performance. The latter condition is not true for the R5000 for example which implements the prefetch instructions as nops. Conditional prefetches are a bad idea, so you really want to define this as a constant only.
- True if the processor supports a machine check exception.
- True if the system supports EJTAG.
- True if the system has
load linked</code and
- True if the processor has a virtually tagged I-cache.
- True if the D-cache of the processor might suffer from virtual aliases.
- True if the I-cache may do refills on misses directly from the I-cache.
I-Cache snoops remote store. This only matters on SMP. Some multiprocessors such as the R10000 have I-Caches that snoop local stores; the embedded ones don't. For maintaining I-cache coherency this means we need to flush the D-cache all the way back to whever the I-cache does refills from, so the I-cache has a chance to see the new data at all. Then we have to flush the I-cache also. Note we may have been rescheduled and may no longer be running on the CPU that did the store so we can't optimize this into only doing the flush on the local CPU.
- True if the I-cache snoops remote stores. This feature on for example the R10000 allows the cache to be optimized to only flush the local I-cache when code has been modified.
- RM7000 and RM9000 may throw bizarre exceptions if not the whole cacheline contains valid instructions. For these we ensure proper alignment of signal trampolines and pad them to the size of a full cache lines with nops. This is also used in structure definitions so can't be a test macro like the others.
- True if the CPU does not support FPU exceptions. This is needed for processors with R2000-style FPU coupling.
- True if the processor is a 64-bit processor. Note that MIPS64 makes the support for 64-bit addresses optional, so if testing for the precense of 64-bit address spaces use
- True if the
$zeroregister has 64-bit. Since this register can't be corrupted it's safe to use as 64-bit register it even on 32-bit kernels, so this feature test macro should always return true on 64-bit processors.
- True if it's safe to use 64-bit general purpose registers, so this is only set on 64-bit kernels. Some code running with interrupts disabled may use 64-bit registers safely even in 32-bit kernels, so should use
- True if 64-bit virtual addresses are in use, that is at the moment this is equivalent to the kernel being 64-bit.
- True on processors where the primary caches must be a subset of the secondary cache. This for example is true for the R4000 but not for the RM7000.
- The line size of the data cache.
- The line size of the primary I-cache.
- The line size of the secondary S-cache, if present. Only used for CPUs with a builtin S-cache controller.