From LinuxMIPS
Revision as of 13:13, 17 April 2005 by Zoobab (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

! Serial port access (115000, 8N1):

{{{ Linux Loader Menu


(a) Download vmlinuz to flash ... (b) Download vmlinuz to sdram (for debug) ... (c) Exit

Please enter your key :

ADM5120 Boot: no sys signature found!!

jump to linux code!!

LINUX started... ADM5120 Demo board CPU revision is: 0001800b Primary instruction cache 8kb, linesize 16 bytes (2 ways) Primary data cache 8kb, linesize 16 bytes (2 ways) Linux version 2.4.18-MIPS-01.00 (root@betty_linux) #340 ¶g.- 7.ë 2 14:33:38 CST 2004 am5120_setup() starts. System has PCI BIOS Determined physical RAM map:

memory: 00d24000 @ 002dc000 (usable)

Initial ramdisk at: 0x80176000 (1318802 bytes) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/ram0 console=ttyS0 CPU clock: 175MHz Calibrating delay loop... 174.48 BogoMIPS Memory: 13188k/13456k available (1321k kernel code, 268k reserved, 1376k data, 60k init, 0k highmem) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX Autoconfig PCI channel 0x801756e8 Scanning bus 00, I/O 0x11500000:0x115ffff0, Mem 0x11400000:0x11500000 00:00.0 Class 0600: 1317:5120

       Mem unavailable -- skipping, bar_size=0x10000000
       I/O unavailable -- skipping, bar_size=0x1000000

fixup resource fixup host controller am5120 fix up pcibios_fixup fixup IRQ Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd pty: 256 Unix98 ptys configured HDLC line discipline: version $Revision: $, maxframe=4096 N_HDLC line discipline registered. block: 64 slots per queue, batch=16 RAMDISK driver initialized: 16 RAM disks of 5120K size 1024 blocksize loop: loaded (max 8 devices) ADM5120 Switch Module Init PPP generic driver version 2.4.1 MX29LV320B flash device: 200000 at 1fc00000 MX29LV320B flash device: Found 1 x16 devices at 0x0 in 16-bit mode

Amd/Fujitsu Extended Query Table at 0x0040                                                                                                    

force TopBomtom to 3

 Silicon revision: 0                                                                                                                          
 Address sensitive unlock: Required                                                                                                           
 Erase Suspend: Read/write                                                                                                                    
 Block protection: 1 sectors per group                                                                                                        
 Temporary block unprotect: Supported                                                                                                         
 Block protect/unprotect scheme: 4                                                                                                            
 Number of simultaneous operations: 0                                                                                                         
 Burst mode: Not supported                                                                                                                    
 Page mode: Not supported                                                                                                                     
 Vpp Supply Minimum Program/Erase Voltage: 15.15 V                                                                                            
 Vpp Supply Maximum Program/Erase Voltage: 15.15 V                                                                                            
 Top/Bottom Boot Block: Top boot                                                                                                              

NumEraseRegions = 4 cfi->cfiq->EraseRegionInfo 0 = 400000 cfi->cfiq->EraseRegionInfo 1 = 200001 cfi->cfiq->EraseRegionInfo 2 = 800000 cfi->cfiq->EraseRegionInfo 3 = 100001e number of CFI chips: 1 0: offset=0x0,size=0x4000,blocks=1 1: offset=0x4000,size=0x2000,blocks=2 2: offset=0x8000,size=0x8000,blocks=1 3: offset=0x10000,size=0x10000,blocks=31 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Creating 1 MTD partitions on "MX29LV320B flash device": 0x00000000-0x00200000 : "Flash Disk 1" ftl_cs: FTL header not found. MX29LV320B flash device initialized NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) GRE over IPv4 tunneling driver ip_conntrack version 2.1 (128 buckets, 1024 max) - 360 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.2.3: Stephen Frost <>. ipt_time loading NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 LED & GPIO Driver v1.0 RAMDISK: bzip2 compressed image found at block 0 Freeing initrd memory: 1287k freed VFS: Mounted root (ext2 filesystem). Freeing prom memory: 0kb freed Freeing unused kernel memory: 60k freed Using /bin/IPN2220AP.o


Loading ... IPN2220AP Ver: Build: Jun 18 2004 10:05:33

c0025f94 wlan_open [IPN2220AP]

IPN2220AP: No device found. insmod: init_module: IPN2220AP: No such device

Please press Enter to activate this console.

BusyBox v1.00-pre2 (2004.05.06-06:52+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. }}}