linux-mips
[Top] [All Lists]

[PATCH v6 1/4] MIPS: Loongson64: lemote-2f move ec_kb3310b.h to include

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH v6 1/4] MIPS: Loongson64: lemote-2f move ec_kb3310b.h to include dir and clean up
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
Date: Tue, 26 Dec 2017 11:25:59 +0800
Authentication-results: smtp4j.mail.yandex.net; dkim=pass header.i=@flygoat.com
Cc: James Hogan <james.hogan@mips.com>, Huacai CHen <chenhc@lemote.com>, linux-mips@linux-mips.org, linux-kernel@vger.kernel.org, Jiaxun Yang <jiaxun.yang@flygoat.com>
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=flygoat.com; s=mail; t=1514258781; bh=yfGXoBG4XqhCP1wMwAPnoiZYDgxJ+V+C8LtCjkvCRGQ=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References; b=kKQjxt9N7t7DMqzmb9NNvXMJmggif76lOZ2l/5kOGHKbalswb89sC31ItFpTN9ijH yW4o34Cuhzso1TwYxlzkig5rqwUnlsle+8WNF/YMf3t06KZh8l7ncaiKengiZgscxP 3qeHMe76suIpA7bWG2JKynscP3VqBDfNLy9dT98w=
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=flygoat.com; s=mail; t=1514258778; bh=yfGXoBG4XqhCP1wMwAPnoiZYDgxJ+V+C8LtCjkvCRGQ=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References; b=DuAInX+4gEJt05TQR2St841CwC0DPtW1Ku4Mfgq75gk7g5iXKmYYR6M8jvLRraUyy TnK1LwZHwFKarmRYBpA7XbJ/YVp/lTeTK0i75fXZ7nz8qKHC+672rYYtNrv6ypYM5J aGDETZ3rZ5Ik5mQjAltDMhLU0cXVabwZ4ZR8s+j0=
In-reply-to: <20171226032602.11417-1-jiaxun.yang@flygoat.com>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20171226032602.11417-1-jiaxun.yang@flygoat.com>
Sender: linux-mips-bounce@linux-mips.org
To operate EC from platform driver, this head file need able to be include
from anywhere. This patch just move ec_kb3310b.h to include dir and
clean up ec_kb3310b.h.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 arch/mips/include/asm/mach-loongson64/ec_kb3310b.h | 170 +++++++++++++++++++
 arch/mips/loongson64/lemote-2f/ec_kb3310b.c        |   2 +-
 arch/mips/loongson64/lemote-2f/ec_kb3310b.h        | 188 ---------------------
 arch/mips/loongson64/lemote-2f/pm.c                |   4 +-
 arch/mips/loongson64/lemote-2f/reset.c             |   4 +-
 5 files changed, 175 insertions(+), 193 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-loongson64/ec_kb3310b.h
 delete mode 100644 arch/mips/loongson64/lemote-2f/ec_kb3310b.h

diff --git a/arch/mips/include/asm/mach-loongson64/ec_kb3310b.h 
b/arch/mips/include/asm/mach-loongson64/ec_kb3310b.h
new file mode 100644
index 000000000000..2e8690532ea5
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson64/ec_kb3310b.h
@@ -0,0 +1,170 @@
+/*
+ * KB3310B Embedded Controller
+ *
+ *  Copyright (C) 2008 Lemote Inc.
+ *  Author: liujl <liujl@lemote.com>, 2008-03-14
+ *  Copyright (C) 2009 Lemote Inc.
+ *  Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _EC_KB3310B_H
+#define _EC_KB3310B_H
+
+extern unsigned char ec_read(unsigned short addr);
+extern void ec_write(unsigned short addr, unsigned char val);
+extern int ec_query_seq(unsigned char cmd);
+extern int ec_query_event_num(void);
+extern int ec_get_event_num(void);
+
+typedef int (*sci_handler) (int status);
+extern sci_handler yeeloong_report_lid_status;
+
+#define ON     1
+#define OFF    0
+
+#define SCI_IRQ_NUM 0x0A
+
+/*
+ * The following registers are determined by the EC index configuration.
+ * 1, fill the PORT_HIGH as EC register high part.
+ * 2, fill the PORT_LOW as EC register low part.
+ * 3, fill the PORT_DATA as EC register write data or get the data from it.
+ */
+#define        EC_IO_PORT_HIGH 0x0381
+#define        EC_IO_PORT_LOW  0x0382
+#define        EC_IO_PORT_DATA 0x0383
+
+/*
+ * EC delay time is 500us for register and status access
+ */
+#define        EC_REG_DELAY    500     /* unit : us */
+#define        EC_CMD_TIMEOUT  0x1000
+
+/*
+ * EC access port for SCI communication
+ */
+#define        EC_CMD_PORT             0x66
+#define        EC_STS_PORT             0x66
+#define        EC_DAT_PORT             0x62
+#define        CMD_INIT_IDLE_MODE      0xdd
+#define        CMD_EXIT_IDLE_MODE      0xdf
+#define        CMD_INIT_RESET_MODE     0xd8
+#define        CMD_REBOOT_SYSTEM       0x8c
+#define        CMD_GET_EVENT_NUM       0x84
+#define        CMD_PROGRAM_PIECE       0xda
+
+/* Temperature & Fan registers */
+#define        REG_TEMPERATURE_VALUE   0xF458
+#define        REG_FAN_AUTO_MAN_SWITCH 0xF459
+#define        BIT_FAN_AUTO            0
+#define        BIT_FAN_MANUAL          1
+#define        REG_FAN_CONTROL         0xF4D2
+#define        REG_FAN_STATUS          0xF4DA
+#define        REG_FAN_SPEED_HIGH      0xFE22
+#define        REG_FAN_SPEED_LOW       0xFE23
+#define        REG_FAN_SPEED_LEVEL     0xF4CC
+/* Fan speed divider */
+#define        FAN_SPEED_DIVIDER       480000  /* (60*1000*1000/62.5/2)*/
+
+/* Battery registers */
+#define        REG_BAT_DESIGN_CAP_HIGH         0xF77D
+#define        REG_BAT_DESIGN_CAP_LOW          0xF77E
+#define        REG_BAT_FULLCHG_CAP_HIGH        0xF780
+#define        REG_BAT_FULLCHG_CAP_LOW         0xF781
+#define        REG_BAT_DESIGN_VOL_HIGH         0xF782
+#define        REG_BAT_DESIGN_VOL_LOW          0xF783
+#define        REG_BAT_CURRENT_HIGH            0xF784
+#define        REG_BAT_CURRENT_LOW             0xF785
+#define        REG_BAT_VOLTAGE_HIGH            0xF786
+#define        REG_BAT_VOLTAGE_LOW             0xF787
+#define        REG_BAT_TEMPERATURE_HIGH        0xF788
+#define        REG_BAT_TEMPERATURE_LOW         0xF789
+#define        REG_BAT_RELATIVE_CAP_HIGH       0xF492
+#define        REG_BAT_RELATIVE_CAP_LOW        0xF493
+#define        REG_BAT_VENDOR                  0xF4C4
+#define        FLAG_BAT_VENDOR_SANYO           0x01
+#define        FLAG_BAT_VENDOR_SIMPLO          0x02
+#define        REG_BAT_CELL_COUNT              0xF4C6
+#define        FLAG_BAT_CELL_3S1P              0x03
+#define        FLAG_BAT_CELL_3S2P              0x06
+#define        REG_BAT_CHARGE                  0xF4A2
+#define        FLAG_BAT_CHARGE_DISCHARGE       0x01
+#define        FLAG_BAT_CHARGE_CHARGE          0x02
+#define        FLAG_BAT_CHARGE_ACPOWER         0x00
+#define        REG_BAT_STATUS                  0xF4B0
+#define        BIT_BAT_STATUS_LOW              (1 << 5)
+#define        BIT_BAT_STATUS_DESTROY          (1 << 2)
+#define        BIT_BAT_STATUS_FULL             (1 << 1)
+#define        BIT_BAT_STATUS_IN               (1 << 0)
+#define        REG_BAT_CHARGE_STATUS           0xF4B1
+#define        BIT_BAT_CHARGE_STATUS_OVERTEMP  (1 << 2)
+#define        BIT_BAT_CHARGE_STATUS_PRECHG    (1 << 1)
+#define        REG_BAT_STATE                   0xF482
+#define        REG_BAT_POWER                   0xF440
+#define        BIT_BAT_POWER_S3                (1 << 2)
+#define        BIT_BAT_POWER_ON                (1 << 1)
+#define        BIT_BAT_POWER_ACIN              (1 << 0)
+
+/* Audio: rd/wr */
+#define        REG_AUDIO_VOLUME        0xF46C
+#define        REG_AUDIO_MUTE          0xF4E7
+#define        REG_AUDIO_BEEP          0xF4D0
+/* USB port power or not: rd/wr */
+#define        REG_USB0_FLAG           0xF461
+#define        REG_USB1_FLAG           0xF462
+#define        REG_USB2_FLAG           0xF463
+/* LID */
+#define        REG_LID_DETECT          0xF4BD
+/* CRT */
+#define        REG_CRT_DETECT          0xF4AD
+/* LCD backlight brightness adjust: 9 levels */
+#define        REG_DISPLAY_BRIGHTNESS  0xF4F5
+/* LCD backlight control: off/restore */
+#define        REG_BACKLIGHT_CTRL      0xF7BD
+/* Reset the machine auto-clear: rd/wr */
+#define        REG_RESET               0xF4EC
+/* Light the led: rd/wr */
+#define        REG_LED                 0xF4C8
+#define        BIT_LED_RED_POWER       (1 << 0)
+#define        BIT_LED_ORANGE_POWER    (1 << 1)
+#define        BIT_LED_GREEN_CHARGE    (1 << 2)
+#define        BIT_LED_RED_CHARGE      (1 << 3)
+#define        BIT_LED_NUMLOCK         (1 << 4)
+/* Test led mode, all led on/off */
+#define        REG_LED_TEST            0xF4C2
+#define        BIT_LED_TEST_IN         1
+#define        BIT_LED_TEST_OUT        0
+/* Camera on/off */
+#define        REG_CAMERA_STATUS       0xF46A
+#define        REG_CAMERA_CONTROL      0xF7B7
+/* Wlan Status */
+#define        REG_WLAN                0xF4FA
+#define        REG_DISPLAY_LCD         0xF79F
+
+/* SCI Event Number from EC */
+enum {
+       EVENT_LID = 0x23,       /*  Turn on/off LID */
+       EVENT_SWITCHVIDEOMODE,  /*  Fn+F3 for display switch */
+       EVENT_SLEEP,            /*  Fn+F1 for entering sleep mode */
+       EVENT_OVERTEMP,         /*  Over-temperature happened */
+       EVENT_CRT_DETECT,       /*  CRT is connected */
+       EVENT_CAMERA,           /*  Camera on/off */
+       EVENT_USB_OC2,          /*  USB2 Over Current occurred */
+       EVENT_USB_OC0,          /*  USB0 Over Current occurred */
+       EVENT_DISPLAYTOGGLE,    /*  Fn+F2, Turn on/off backlight */
+       EVENT_AUDIO_MUTE,       /*  Fn+F4, Mute on/off */
+       EVENT_DISPLAY_BRIGHTNESS,/* Fn+^/V, LCD backlight brightness adjust */
+       EVENT_AC_BAT,           /*  AC & Battery relative issue */
+       EVENT_AUDIO_VOLUME,     /*  Fn+<|>, Volume adjust */
+       EVENT_WLAN,             /*  Wlan on/off */
+};
+
+#define EVENT_START    EVENT_LID
+#define EVENT_END      EVENT_WLAN
+
+#endif /* !_EC_KB3310B_H */
diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c 
b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
index 321822997e76..6e416d55b42a 100644
--- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
+++ b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
@@ -15,7 +15,7 @@
 #include <linux/spinlock.h>
 #include <linux/delay.h>
 
-#include "ec_kb3310b.h"
+#include <ec_kb3310b.h>
 
 static DEFINE_SPINLOCK(index_access_lock);
 static DEFINE_SPINLOCK(port_access_lock);
diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h 
b/arch/mips/loongson64/lemote-2f/ec_kb3310b.h
deleted file mode 100644
index 5a3f1860d4d2..000000000000
--- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * KB3310B Embedded Controller
- *
- *  Copyright (C) 2008 Lemote Inc.
- *  Author: liujl <liujl@lemote.com>, 2008-03-14
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _EC_KB3310B_H
-#define _EC_KB3310B_H
-
-extern unsigned char ec_read(unsigned short addr);
-extern void ec_write(unsigned short addr, unsigned char val);
-extern int ec_query_seq(unsigned char cmd);
-extern int ec_query_event_num(void);
-extern int ec_get_event_num(void);
-
-typedef int (*sci_handler) (int status);
-extern sci_handler yeeloong_report_lid_status;
-
-#define SCI_IRQ_NUM 0x0A
-
-/*
- * The following registers are determined by the EC index configuration.
- * 1, fill the PORT_HIGH as EC register high part.
- * 2, fill the PORT_LOW as EC register low part.
- * 3, fill the PORT_DATA as EC register write data or get the data from it.
- */
-#define EC_IO_PORT_HIGH 0x0381
-#define EC_IO_PORT_LOW 0x0382
-#define EC_IO_PORT_DATA 0x0383
-
-/*
- * EC delay time is 500us for register and status access
- */
-#define EC_REG_DELAY   500     /* unit : us */
-#define EC_CMD_TIMEOUT 0x1000
-
-/*
- * EC access port for SCI communication
- */
-#define EC_CMD_PORT            0x66
-#define EC_STS_PORT            0x66
-#define EC_DAT_PORT            0x62
-#define CMD_INIT_IDLE_MODE     0xdd
-#define CMD_EXIT_IDLE_MODE     0xdf
-#define CMD_INIT_RESET_MODE    0xd8
-#define CMD_REBOOT_SYSTEM      0x8c
-#define CMD_GET_EVENT_NUM      0x84
-#define CMD_PROGRAM_PIECE      0xda
-
-/* temperature & fan registers */
-#define REG_TEMPERATURE_VALUE  0xF458
-#define REG_FAN_AUTO_MAN_SWITCH 0xF459
-#define BIT_FAN_AUTO           0
-#define BIT_FAN_MANUAL         1
-#define REG_FAN_CONTROL                0xF4D2
-#define BIT_FAN_CONTROL_ON     (1 << 0)
-#define BIT_FAN_CONTROL_OFF    (0 << 0)
-#define REG_FAN_STATUS         0xF4DA
-#define BIT_FAN_STATUS_ON      (1 << 0)
-#define BIT_FAN_STATUS_OFF     (0 << 0)
-#define REG_FAN_SPEED_HIGH     0xFE22
-#define REG_FAN_SPEED_LOW      0xFE23
-#define REG_FAN_SPEED_LEVEL    0xF4CC
-/* fan speed divider */
-#define FAN_SPEED_DIVIDER      480000  /* (60*1000*1000/62.5/2)*/
-
-/* battery registers */
-#define REG_BAT_DESIGN_CAP_HIGH                0xF77D
-#define REG_BAT_DESIGN_CAP_LOW         0xF77E
-#define REG_BAT_FULLCHG_CAP_HIGH       0xF780
-#define REG_BAT_FULLCHG_CAP_LOW                0xF781
-#define REG_BAT_DESIGN_VOL_HIGH                0xF782
-#define REG_BAT_DESIGN_VOL_LOW         0xF783
-#define REG_BAT_CURRENT_HIGH           0xF784
-#define REG_BAT_CURRENT_LOW            0xF785
-#define REG_BAT_VOLTAGE_HIGH           0xF786
-#define REG_BAT_VOLTAGE_LOW            0xF787
-#define REG_BAT_TEMPERATURE_HIGH       0xF788
-#define REG_BAT_TEMPERATURE_LOW                0xF789
-#define REG_BAT_RELATIVE_CAP_HIGH      0xF492
-#define REG_BAT_RELATIVE_CAP_LOW       0xF493
-#define REG_BAT_VENDOR                 0xF4C4
-#define FLAG_BAT_VENDOR_SANYO          0x01
-#define FLAG_BAT_VENDOR_SIMPLO         0x02
-#define REG_BAT_CELL_COUNT             0xF4C6
-#define FLAG_BAT_CELL_3S1P             0x03
-#define FLAG_BAT_CELL_3S2P             0x06
-#define REG_BAT_CHARGE                 0xF4A2
-#define FLAG_BAT_CHARGE_DISCHARGE      0x01
-#define FLAG_BAT_CHARGE_CHARGE         0x02
-#define FLAG_BAT_CHARGE_ACPOWER                0x00
-#define REG_BAT_STATUS                 0xF4B0
-#define BIT_BAT_STATUS_LOW             (1 << 5)
-#define BIT_BAT_STATUS_DESTROY         (1 << 2)
-#define BIT_BAT_STATUS_FULL            (1 << 1)
-#define BIT_BAT_STATUS_IN              (1 << 0)
-#define REG_BAT_CHARGE_STATUS          0xF4B1
-#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
-#define BIT_BAT_CHARGE_STATUS_PRECHG   (1 << 1)
-#define REG_BAT_STATE                  0xF482
-#define BIT_BAT_STATE_CHARGING         (1 << 1)
-#define BIT_BAT_STATE_DISCHARGING      (1 << 0)
-#define REG_BAT_POWER                  0xF440
-#define BIT_BAT_POWER_S3               (1 << 2)
-#define BIT_BAT_POWER_ON               (1 << 1)
-#define BIT_BAT_POWER_ACIN             (1 << 0)
-
-/* other registers */
-/* Audio: rd/wr */
-#define REG_AUDIO_VOLUME       0xF46C
-#define REG_AUDIO_MUTE         0xF4E7
-#define REG_AUDIO_BEEP         0xF4D0
-/* USB port power or not: rd/wr */
-#define REG_USB0_FLAG          0xF461
-#define REG_USB1_FLAG          0xF462
-#define REG_USB2_FLAG          0xF463
-#define BIT_USB_FLAG_ON                1
-#define BIT_USB_FLAG_OFF       0
-/* LID */
-#define REG_LID_DETECT         0xF4BD
-#define BIT_LID_DETECT_ON      1
-#define BIT_LID_DETECT_OFF     0
-/* CRT */
-#define REG_CRT_DETECT         0xF4AD
-#define BIT_CRT_DETECT_PLUG    1
-#define BIT_CRT_DETECT_UNPLUG  0
-/* LCD backlight brightness adjust: 9 levels */
-#define REG_DISPLAY_BRIGHTNESS 0xF4F5
-/* Black screen Status */
-#define BIT_DISPLAY_LCD_ON     1
-#define BIT_DISPLAY_LCD_OFF    0
-/* LCD backlight control: off/restore */
-#define REG_BACKLIGHT_CTRL     0xF7BD
-#define BIT_BACKLIGHT_ON       1
-#define BIT_BACKLIGHT_OFF      0
-/* Reset the machine auto-clear: rd/wr */
-#define REG_RESET              0xF4EC
-#define BIT_RESET_ON           1
-/* Light the led: rd/wr */
-#define REG_LED                        0xF4C8
-#define BIT_LED_RED_POWER      (1 << 0)
-#define BIT_LED_ORANGE_POWER   (1 << 1)
-#define BIT_LED_GREEN_CHARGE   (1 << 2)
-#define BIT_LED_RED_CHARGE     (1 << 3)
-#define BIT_LED_NUMLOCK                (1 << 4)
-/* Test led mode, all led on/off */
-#define REG_LED_TEST           0xF4C2
-#define BIT_LED_TEST_IN                1
-#define BIT_LED_TEST_OUT       0
-/* Camera on/off */
-#define REG_CAMERA_STATUS      0xF46A
-#define BIT_CAMERA_STATUS_ON   1
-#define BIT_CAMERA_STATUS_OFF  0
-#define REG_CAMERA_CONTROL     0xF7B7
-#define BIT_CAMERA_CONTROL_OFF 0
-#define BIT_CAMERA_CONTROL_ON  1
-/* Wlan Status */
-#define REG_WLAN               0xF4FA
-#define BIT_WLAN_ON            1
-#define BIT_WLAN_OFF           0
-#define REG_DISPLAY_LCD                0xF79F
-
-/* SCI Event Number from EC */
-enum {
-       EVENT_LID = 0x23,       /*  LID open/close */
-       EVENT_DISPLAY_TOGGLE,   /*  Fn+F3 for display switch */
-       EVENT_SLEEP,            /*  Fn+F1 for entering sleep mode */
-       EVENT_OVERTEMP,         /*  Over-temperature happened */
-       EVENT_CRT_DETECT,       /*  CRT is connected */
-       EVENT_CAMERA,           /*  Camera on/off */
-       EVENT_USB_OC2,          /*  USB2 Over Current occurred */
-       EVENT_USB_OC0,          /*  USB0 Over Current occurred */
-       EVENT_BLACK_SCREEN,     /*  Turn on/off backlight */
-       EVENT_AUDIO_MUTE,       /*  Mute on/off */
-       EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
-       EVENT_AC_BAT,           /*  AC & Battery relative issue */
-       EVENT_AUDIO_VOLUME,     /*  Volume adjust */
-       EVENT_WLAN,             /*  Wlan on/off */
-       EVENT_END
-};
-
-#endif /* !_EC_KB3310B_H */
diff --git a/arch/mips/loongson64/lemote-2f/pm.c 
b/arch/mips/loongson64/lemote-2f/pm.c
index 6859e934862d..0768739155f6 100644
--- a/arch/mips/loongson64/lemote-2f/pm.c
+++ b/arch/mips/loongson64/lemote-2f/pm.c
@@ -88,7 +88,7 @@ EXPORT_SYMBOL(yeeloong_report_lid_status);
 static void yeeloong_lid_update_task(struct work_struct *work)
 {
        if (yeeloong_report_lid_status)
-               yeeloong_report_lid_status(BIT_LID_DETECT_ON);
+               yeeloong_report_lid_status(ON);
 }
 
 int wakeup_loongson(void)
@@ -118,7 +118,7 @@ int wakeup_loongson(void)
                        /* check the LID status */
                        lid_status = ec_read(REG_LID_DETECT);
                        /* wakeup cpu when people open the LID */
-                       if (lid_status == BIT_LID_DETECT_ON) {
+                       if (lid_status == ON) {
                                /* If we call it directly here, the WARNING
                                 * will be sent out by getnstimeofday
                                 * via "WARN_ON(timekeeping_suspended);"
diff --git a/arch/mips/loongson64/lemote-2f/reset.c 
b/arch/mips/loongson64/lemote-2f/reset.c
index a26ca7fcd7e0..2b72b197c51d 100644
--- a/arch/mips/loongson64/lemote-2f/reset.c
+++ b/arch/mips/loongson64/lemote-2f/reset.c
@@ -20,7 +20,7 @@
 #include <loongson.h>
 
 #include <cs5536/cs5536.h>
-#include "ec_kb3310b.h"
+#include <ec_kb3310b.h>
 
 static void reset_cpu(void)
 {
@@ -81,7 +81,7 @@ static void ml2f_reboot(void)
        reset_cpu();
 
        /* sending an reset signal to EC(embedded controller) */
-       ec_write(REG_RESET, BIT_RESET_ON);
+       ec_write(REG_RESET, ON);
 }
 
 #define yl2f89_reboot ml2f_reboot
-- 
2.15.1


<Prev in Thread] Current Thread [Next in Thread>