linux-mips
[Top] [All Lists]

Re: [PATCH v2] FIRMWARE: bcm47xx_nvram: Replace mac address parsing

To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>, Rafał Miłecki <zajec5@gmail.com>, linux-mips@linux-mips.org, "David S . Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Subject: Re: [PATCH v2] FIRMWARE: bcm47xx_nvram: Replace mac address parsing
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Thu, 21 Dec 2017 17:42:16 +0100
In-reply-to: <20171221144055.3840-1-andriy.shevchenko@linux.intel.com>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <20171221144055.3840-1-andriy.shevchenko@linux.intel.com>
Sender: linux-mips-bounce@linux-mips.org

On 12/21/2017 03:40 PM, Andy Shevchenko wrote:
> Replace sscanf() with mac_pton().
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Acked-by: Hauke Mehrtens <hauke@hauke-m.de>

The patch looks good, but I haven't tested them on my devices.

> ---
> - use negative condition to be consistent with the rest code
>  drivers/firmware/broadcom/Kconfig         |  1 +
>  drivers/firmware/broadcom/bcm47xx_sprom.c | 18 +++---------------
>  2 files changed, 4 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/firmware/broadcom/Kconfig 
> b/drivers/firmware/broadcom/Kconfig
> index 5e29f83e7b39..c041dcb7ea52 100644
> --- a/drivers/firmware/broadcom/Kconfig
> +++ b/drivers/firmware/broadcom/Kconfig
> @@ -13,6 +13,7 @@ config BCM47XX_NVRAM
>  config BCM47XX_SPROM
>       bool "Broadcom SPROM driver"
>       depends on BCM47XX_NVRAM
> +     select GENERIC_NET_UTILS
>       help
>         Broadcom devices store configuration data in SPROM. Accessing it is
>         specific to the bus host type, e.g. PCI(e) devices have it mapped in
> diff --git a/drivers/firmware/broadcom/bcm47xx_sprom.c 
> b/drivers/firmware/broadcom/bcm47xx_sprom.c
> index 62aa3cf09b4d..4787f86c8ac1 100644
> --- a/drivers/firmware/broadcom/bcm47xx_sprom.c
> +++ b/drivers/firmware/broadcom/bcm47xx_sprom.c
> @@ -137,20 +137,6 @@ static void nvram_read_leddc(const char *prefix, const 
> char *name,
>       *leddc_off_time = (val >> 16) & 0xff;
>  }
>  
> -static void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6])
> -{
> -     if (strchr(buf, ':'))
> -             sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
> -                     &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
> -                     &macaddr[5]);
> -     else if (strchr(buf, '-'))
> -             sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
> -                     &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
> -                     &macaddr[5]);
> -     else
> -             pr_warn("Can not parse mac address: %s\n", buf);
> -}
> -
>  static void nvram_read_macaddr(const char *prefix, const char *name,
>                              u8 val[6], bool fallback)
>  {
> @@ -161,7 +147,9 @@ static void nvram_read_macaddr(const char *prefix, const 
> char *name,
>       if (err < 0)
>               return;
>  
> -     bcm47xx_nvram_parse_macaddr(buf, val);
> +     strreplace(buf, '-', ':');
> +     if (!mac_pton(buf, val))
> +             pr_warn("Can not parse mac address: %s\n", buf);
>  }
>  
>  static void nvram_read_alpha2(const char *prefix, const char *name,
> 

<Prev in Thread] Current Thread [Next in Thread>