From: Paul Burton <paul.burton@mips.com>
Document a binding for the MIPS Cluster Power Controller (CPC) which
simply allows the device tree to specify where the CPC registers should
be mapped.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
---
Documentation/devicetree/bindings/misc/mti,mips-cpc.txt | 8 ++++++++
1 file changed, 8 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
diff --git a/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
b/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
new file mode 100644
index 0000000..92eb08f
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mti,mips-cpc.txt
@@ -0,0 +1,8 @@
+Binding for MIPS Cluster Power Controller (CPC).
+
+This binding allows a system to specify where the CPC registers should be
+mapped using device tree.
+
+Required properties:
+compatible : Should be "mti,mips-cpc".
+regs: Should describe the address & size of the CPC register region.
--
2.7.4
|