linux-mips
[Top] [All Lists]

[PATCH 1/2] MIPS: ralink: fix bad config symbol in pci makefile

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH 1/2] MIPS: ralink: fix bad config symbol in pci makefile
From: John Crispin <blogic@openwrt.org>
Date: Mon, 23 Feb 2015 06:17:32 +0100
Cc: linux-mips@linux-mips.org, Paul Bolle <pebolle@tiscali.nl>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
Sender: linux-mips-bounce@linux-mips.org
A wrong symbol is referenced by commit 187c26ddf0b2 ("MIPS: ralink: add rt2880
pci driver"). Fix this by changing it to the correct symbol.

Signed-off-by: John Crispin <blogic@openwrt.org>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
---
 arch/mips/pci/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 300591c..2eda01e 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -43,7 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)  += pci-bcm1480.o pci-bcm1480ht.o
 obj-$(CONFIG_SNI_RM)           += fixup-sni.o ops-sni.o
 obj-$(CONFIG_LANTIQ)           += fixup-lantiq.o
 obj-$(CONFIG_PCI_LANTIQ)       += pci-lantiq.o ops-lantiq.o
-obj-$(CONFIG_SOC_RT2880)       += pci-rt2880.o
+obj-$(CONFIG_SOC_RT288X)       += pci-rt2880.o
 obj-$(CONFIG_SOC_RT3883)       += pci-rt3883.o
 obj-$(CONFIG_TANBAC_TB0219)    += fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)    += fixup-tb0226.o
-- 
1.7.10.4


<Prev in Thread] Current Thread [Next in Thread>