[Top] [All Lists]

Problems with BCM91125E

Subject: Problems with BCM91125E
From: Matt Turner <>
Date: Mon, 26 Jul 2010 14:30:48 -0400
Cc: Mark E Mason <>
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed;; s=gamma; h=domainkey-signature:received:mime-version:received:from:date :message-id:subject:to:cc:content-type; bh=SqOvIApdEFknVvfkPQPVdUhAir1PE3eOJjwgIFTeQzg=; b=hU4h2GzHSVtLaaSRETmLp75XhQ6O63kMwy42h+X3WvBdODP2yrfm3hPO21si1f2caR 4WmSZKv9KHDHG+X1g25fLJhinmLrO6jVrj1IFz9HTrxUwEW9z/IAsEbLOXij2d5lM/gs Zg0Fkkq85+8ovAR3g510jdjDGtboEmE6iivHk=
Domainkey-signature: a=rsa-sha1; c=nofws;; s=gamma; h=mime-version:from:date:message-id:subject:to:cc:content-type; b=Ta4fXr9clWMArdy3C6tdE3f161shVswknZIZv1MebD1u0LHMos7i2FnlOmAMYJplW8 AvTmnYQXUib3/MvwX+4bZnYnRZuDSRLE1JFtnF6MnmBBUrUdZPUB7lU5REzUAnuavhP9 luSf4/wKkGPTGnruGATZE9aIFG4ExWbb3RkqE=
Original-recipient: rfc822;
I got a Broadcom BCM91125E, supposedly "Used, system pull tested good."

I checked the manual [0] to verify that all switches were in the
default positions, and they were. I plugged my serial cable in and
turned it on, and it printed


and then it stops. According to this document [1] 'RAMX' means "Fatal
error. Displayed if there is no RAM in the system" which is
particularly odd as RAM chips are soldiered on the board.

So, I asked the seller how did he test this board, and what were his
results, and he admitted that they didn't test it, saying "I have no
result to show you, this card we pull out from the working system."

Does anyone have any idea what's wrong here or how to fix it?

Matt Turner


<Prev in Thread] Current Thread [Next in Thread>