[Top] [All Lists]

RE: "Segfault/illegal instruction" - udevd - ntpd - glibc

Subject: RE: "Segfault/illegal instruction" - udevd - ntpd - glibc
From: "Shane McDonald" <>
Date: Thu, 19 Jul 2007 22:19:38 -0600
Dkim-signature: a=rsa-sha1; c=relaxed/relaxed;; s=beta; h=domainkey-signature:received:received:message-id:date:from:to:subject:cc:mime-version:content-type; b=XV7zfDWurITxLxszlsNJDWn6Xc1m1rdzam8gRM5WuKhq2OPnVZc5TqIY4hCfIdhSnsrKz6YbmcBrsa9uLZtySrnW30INTnMQmdH9Lt3eZ7fvs1C2eGq/Mb2NbfyuxV1OtNwGOZjq4b0VKLNWGXuFJ63biPtVMUyNv45Q4AEYW2g=
Domainkey-signature: a=rsa-sha1; c=nofws;; s=beta; h=received:message-id:date:from:to:subject:cc:mime-version:content-type; b=JW0xOcSKXMwWwrHRE+YiAEcVImgs+VUmC/TY3TbZ5T7uFwTsqs46DUv8SMgwC+9jXZVGK5xMMpxsLmgH9iuBdPDueEyF3AHGMBukdiFjOlbu+TpWsJJy0BrCsUCLRHF/J1H978SnzPLDBeezq7B0hlmbu5Ff5qeUbe3PUnLR2f4=
Original-recipient: rfc822;
Hello Sadarul:

  I'm not sure if you've found a solution to your problem with udevd and ntpd dying during your repetitive bootups.  As Ralf has pointed out, it sounds like a TLB or cache management problem.  I believe it is the same problem that I've run across using the PMC-Sierra Xiao Hu board, whose solution is described here:

  The XH is basically the same platform as your MIPSEL board.  Looking at the code to your BSP, release 1.8.3, I can see that the described workaround will not be used for either of your boards.  I know definitely that the workaround is required for your MIPSEL platform; I suspect it is also required for the MIPS board you have, as that is using the RM9150 which uses the E9000 core.

  Anyways, give that fix a try and see how it goes.  I'll bet it will solve your problem.

<Prev in Thread] Current Thread [Next in Thread>
  • RE: "Segfault/illegal instruction" - udevd - ntpd - glibc, Shane McDonald <=