[Top] [All Lists]

Bus error on sb1250

Subject: Bus error on sb1250
From: Peter 'p2' De Schrijver <>
Date: Sat, 24 Sep 2005 23:57:10 +0200
Original-recipient: rfc822;
User-agent: Mutt/1.5.6+20040907i

I'm seeing some strange bus errors when trying to get the Fore
ForeRunner PCA-200EPC card to work on the sibyte swarm. The driver polls
a register on this card for status information. This triggers a bus
error once in a while. This happens regardless if the card is attached
to the PCI bus of the sb1250 or to the PCI bus behind the Alliance HT -
PCI bridge. 

The bus error dump looks as follows :

DBE physical address: 0041000400
Data bus error, epc == c12f8214, ra == c13533d4
Oops in arch/mips/kernel/traps.c::do_be, line 361[#1]:
Cpu 0
$ 0   : 00000000 00000004 c12f820c c12fac20
$ 4   : c1400404 ffffffff 00ff0000 00000000
$ 8   : 00000000 00000000 00000000 8d903d48
$12   : 00000010 8d903c54 00000000 ffffffff
$16   : fffffed8 80350000 fffd59a9 c1350000
$20   : 8d410000 c1400404 803a7900 01000000
$24   : ffffffff 00000004
$28   : 8d902000 8d903cd8 c1300000 c13533d4
Hi    : 00040fff
Lo    : fb4d8000
epc   : c12f8214 fore200e_pca_read+0x8/0x54 [fore_200e]     Not tainted
ra    : c13533d4 fore200e_monitor_getc+0x9c/0x10c [fore_200e]
Status: 10001f03    KERNEL EXL IE
Cause : 0080801c
PrId  : 01040102
Modules linked in: fore_200e videodev nfsd exportfs lockd sunrpc md5 ipv6 ide_cs
eth1394 ohci1394 ieee1394 ehci_hcd usbhid ohci_hcd usbcore clip atm ide_cd 
cdrom genrtc
Process insmod (pid: 2473, threadinfo=8d902000, task=8f66c500)
Stack : 000024ae 8d410020 c1300000 80201ac4 c1353338 8d903d41 8d410000 c1350000
        01000000 8d410020 c1300000 80201ac4 c1353690 c13535dc 803a892a 10001f01
        000056c0 00000000 00000000 2ac23ae0 81298ea0 00000030 8d903db4 c12fe220
        ffffffff ffffffff 0d676f20 35366330 0d003dd0 8d410029 ffffffff ffffffff
        ffffffff 00000002 c1300000 41000000 0000000a ffffffff ffffffff 00000002
Call Trace: 
 [<c1300000>] inet6_release+0x0/0x78 [ipv6]
 [<80201ac4>] sprintf+0x0/0x3c
 [<c1353338>] fore200e_monitor_getc+0x0/0x10c [fore_200e]
 [<c1300000>] inet6_release+0x0/0x78 [ipv6]
 [<80201ac4>] sprintf+0x0/0x3c
 [<c1353690>] fore200e_init+0x24c/0xd38 [fore_200e]
 [<c13535dc>] fore200e_init+0x198/0xd38 [fore_200e]
 [<c1300000>] inet6_release+0x0/0x78 [ipv6]
 [<c1300000>] inet6_release+0x0/0x78 [ipv6]
 [<80201ac4>] sprintf+0x0/0x3c
 [<c1300000>] inet6_release+0x0/0x78 [ipv6]
 [<80201ac4>] sprintf+0x0/0x3c
 [<c1300000>] inet6_release+0x0/0x78 [ipv6]
 [<c12f9f34>] fore200e_pca_detect+0x150/0x204 [fore_200e]
 [<80130000>] release_resource+0x1c/0xbc
 [<8021386c>] pci_device_probe+0x80/0xa4
 [<802137dc>] pci_bus_match+0x18/0x28
 [<8025427c>] driver_probe_device+0x58/0xf0
 [<80314dd0>] klist_next+0x4c/0x80
 [<80254490>] __driver_attach+0x9c/0xc4
 [<802543f4>] __driver_attach+0x0/0xc4
 [<802534b4>] next_device+0x10/0x2c
 [<802543f4>] __driver_attach+0x0/0xc4
 [<80253520>] bus_for_each_dev+0x50/0xb4
 [<80130000>] release_resource+0x1c/0xbc
 [<801fd860>] kobject_register+0x48/0x90
 [<80253b44>] bus_add_driver+0x9c/0x1a4
 [<80213400>] pci_register_driver+0x7c/0xcc
 [<801239d8>] default_wake_function+0x0/0x20
 [<c13542b0>] fore200e_module_init+0x134/0x1ac [fore_200e]
 [<80143634>] kthread_stop+0xc0/0x13c
 [<8014c778>] sys_init_module+0x158/0x39c
 [<8014c740>] sys_init_module+0x120/0x39c
 [<80175f44>] filp_close+0x6c/0xb0
 [<8010bacc>] stack_done+0x20/0x3c
 [<8010bacc>] stack_done+0x20/0x3c

Code: 00000000  8c850000  3c0600ff <30a4ff00> 00051600  00a61824 00052e02  
      00042200  00441025

Any idea why this might be happening ?


Peter (p2).

goa is a state of mind

Attachment: signature.asc
Description: Digital signature

<Prev in Thread] Current Thread [Next in Thread>