[Top] [All Lists]

Re: I built a mipsel-linux toolchain, but it doesn't work

To: David Daney <>
Subject: Re: I built a mipsel-linux toolchain, but it doesn't work
From: moreau francis <>
Date: Fri, 1 Jul 2005 10:00:02 +0200 (CEST)
Cc: zhan rongkai <>,
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024;; h=Message-ID:Received:Date:From:Subject:To:Cc:MIME-Version:Content-Type:Content-Transfer-Encoding; b=JC/Xwq1cJIQExT1x80z3wyl1kJYQSrmCJhr2/JvbHt3UDf5LvJL63ZK27PwCEWOcMuV8hxSzCmg/iMLMoKS3ldMZyVX0YA6o5sac1iWfQBck7cQXcrahD0Bf6GTwpkUXWOokjzSMTJ76yDUDYPgD58f4Y/t5B1evIODmuHH4jVw= ;
Original-recipient: rfc822;
David Daney wrote:

> zhan rongkai wrote:
>> Hi folks,
>> At last night, I built a mipsel-linux cross-toolchain according to the
>> following steps:
>> 1) The list of GNU Toolchain source packages
>> =======================================================
>> * binutils: binutils-2.16.1.tar.gz
>> *      gcc: gcc-3.4.4.tar.gz
>> *    Linux: Linux-2.6.12.tar.bz2 (from
>> *   uClibc: uClibc-0.9.27.tar.gz
>> *      gdb: gdb-6.3.tar.gz
> IIRC gcc does not currently work out-of-the-box with uClibc.  If you are
> using uClibc, your best bet is probably to use the Buildroot system that 
> can be found at the uClibc web site.

Could you develop please ? What kind of config/hack does Buildroot to be able
to use GCC with uClibc ?




Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger 
Téléchargez cette version sur

<Prev in Thread] Current Thread [Next in Thread>