[Top] [All Lists]

Re: Big Endian au1550

Subject: Re: Big Endian au1550
From: JP Foster <>
Date: Thu, 24 Feb 2005 10:04:55 +0000
In-reply-to: <000001c519d1$84d9c250$0300a8c0@Exterity.local>
Original-recipient: rfc822;
References: <1109157737.16445.6.camel@localhost.localdomain> <000301c5199d$3154ad40$0300a8c0@Exterity.local> <1109160313.16445.20.camel@localhost.localdomain> <> <> <000001c519d1$84d9c250$0300a8c0@Exterity.local>
On Wed, 2005-02-23 at 18:00 +0000, Pete Popov wrote:
>Thomas Sailer wrote:
>> On Wed, 2005-02-23 at 10:03 -0500, Dan Malek wrote:
>>>The only issues with big endian Au1xxx is the USB and potentially
>>>PCI.  There have been recent patches posted for USB that could
>>>fix this.  The PCI problem is with the read/write/in/out macros.
>> Last time I tried (about a month ago using the then current linux-mips
>> 2.6 CVS tree), USB host didn't work neither in big nor little endian
>> mode on my AMD Pb1000. Ethernet and Serial worked either way.
>We've been doing all the 2.6 work on the Db1x boards. The Pb1x need 
>an uplift as well, but I don't know if we'll have time to do it.

Great, but I still can't get a running kernel from cvs mips-linux for
a DB1550 board. Is it perhaps the toolchain? I'm using gcc-3.4.1 perhaps
that is too recent. 

Tried mipsel last night and got the same result as big end so I suspect
it may be my compiler/binutils combination. Is there are recommended
toolchain for mips. Should I go build gcc-2.95 and binutils 2.12 ?


<Prev in Thread] Current Thread [Next in Thread>