[Top] [All Lists]

Re: IRQ problem on cobalt / 2.6.6

Subject: Re: IRQ problem on cobalt / 2.6.6
From: (Kieran Fulke)
Date: Tue, 18 May 2004 22:09:52 +0100
In-reply-to: <>
Original-recipient: rfc822;
References: <> <20040518073439.GA6818@skeleton-jack> <>
User-agent: Mutt/1.5.6i
On Tue, May 18, 2004 at 09:59:14PM +0100, Kieran Fulke wrote:

> <snip-snip>
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with 
> idebus=xx
> VP_IDE: IDE controller at PCI slot 0000:00:09.1
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:09.1
>     ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:pio, hdb:pio
>     ide1: BM-DMA at 0x1428-0x142f, BIOS settings: hdc:pio, hdd:pio
> spurious 8259A interrupt: IRQ9.

i should also mention that the boot process stops at this point.

Attachment: signature.asc
Description: Digital signature

<Prev in Thread] Current Thread [Next in Thread>