> ISA, the good old stonage PC bus system with all it's limitations that also
> infected some MIPS systems.
Let me restate my problem differently, and perhaps a bit more clearly
(as I see it):
My system (Vadem Clio 1000, vr4111) has a VG-469 (i82365) PCMCIA
controller with IO port space at 0x14000000, and IO memory space
The i82365 driver makes the following (reasonable?) expectations:
1) it can use check/request/release_region on I/O ports
- this works fine.
2) it can use in[bwl] and out[bwl] with absolute port numbers
- this also works fine.
3) it can use check/request/release_mem_region on I/O memory
- this fails, because the iomem resource map contains the kernel:
> -more /proc/iomem
00000000-00ffffff : System Ram
00002000-001bc6af : Kernel code
001cf300-00299fff : Kernel data
(this seems very wrong to me, since the kernel is most definately
not in the I/O memory space; real memory, of course, but I/O memory??)
4) it can use ioremap, and then read[bwl] and write[bwl] with the result
- this fails with the current ioremap; neither ioremap nor read/write[bwl]
take isa_slot_offset into account
Am I misunderstanding how this stuff is supposed to work? Is the
i82365 driver doing anything wrong?
(The i82365 driver also makes the incorrect assumption that PCMCIA IRQs
directly correspond to system IRQs, but this is definately a problem
with the driver and I've fixed that.)