Here are my files.
but the build process can't be described in short:(.
I started from a rpm package from redhat7(or similar standard
everything to make it cross-compile,very ugly and painful.Basically,
repeat if errors
make World &> out,
read out,correct errors it reports
beside changes to config files,i remember there were problems due to the
when it cross-builded a problem and wanted to execute it.
From the list,I think someone else should have more elegant way. And i will
H.J.Lu's source in oss.sgi.com when having time.
在 2001-12-06 21:10:00 you wrote：
>I would be very interested in trying to get the video support (using G200
>as you have) up and running on our Malta board with full X.
>Could you provide me with some more info, so that I can try to repeat it?
>E.g. the /etc/X11/XF86Config file, exactly what X server did you use,
>startup output when starting the server (cut & paste, or from
>/var/log/XFree86.0.log or similar).
>Any information much appreciated!
>Zhang Fuxin writes:
>> Finally the 2.4 kernel seems calm down,I pay some time to cleanup
>> my code for algorithmics p6032 board.
>> Although it may still very experimental,i make it public here
>> hoping that it will save sometime for someone else.
>> You can get the source diff
>> (against sgi cvs linux_2_4_branch Dec.3,about 50k) from:
>> (sorry i haven't a dns name)
>> I am eager to get some feedback.
>> There are Changelog and README in arch/mips/algor/
>> for your convenience,READ is post here:
>> This is my code for algor p6032,many of them borrowed/inherit from
>> algorithmics' 2.2 kernel(and others),but with a lot of cleanup(i think:)
>> I have tried my best to make minimum changes to generic code.
>> Testing platform:
>> Algorithmics p6032 eval board,idt RC64474 CPU
>> (with a 40G IBM 7200rpm ide disk,256M sdram memory,matrox G200 video
>> Software: H.J.Lu's cross compile toolchain & redhat 7.1 port)
>> 1.new time,new irq,new pci,auto-pci,etc
>> see this list:
>> 2. frame buffer for matrox cards(that means you can use X windows)
>> 3. a flash driver for easily rewriting of on board flash
>> 4. ide,ethernet(pcnet32) with dma
>> 5. with 2.4.16 patch(filesystem corruption fixed)
>> 1. more test,e.g. with ltp or something
>> I have run 2.4.8 for some time with good stablity,but this upgrade
>> done in one day,with many cleanups
>> it will surely contain some bugs
>> 2. on board cache support
>> i haven't decided a elegant way to support the board cache
>> Important Notes:
>> 1. the command line is fixed at arch/mips/kernel/setup.c for my
>> convenience:),you should change to fit your need or comment it out and use
>> pmon args
>> 2. PIIX support for ide must be choosed,or the irq probe will lead to
>> endless interruption.
>> More information may present in Changelog.zfx.
>> 2001.12.05 Zhang Fuxin, <email@example.com>
>> Institute of Computing Technology,Chinese Academy of Sciences
>> have to get some sleep now:)
>> Zhang Fuxin
> _ _ _____ ____ Hartvig Ekner Mailto:firstname.lastname@example.org
> |\ /| | |____)(____ Direct: +45 4486 5503
> | \/ | | | _____) MIPS Denmark Switch: +45 4486 5555
>T E C H N O L O G I E S http://www.mips.com Fax...: +45 4486 5556
Description: Binary data
Description: Binary data