Carsten Langgaard wrote:
> I have installed your new set of RedHat7.1 RPMs, and tried to build Perl
> But it fails with the following message:
> `sh cflags libperl.a toke.o` toke.c
> CCCMD = gcc -DPERL_CORE -c -fno-strict-aliasing
> Cannot allocate 2676168 bytes after allocating 3899765696 bytes
> make: *** [toke.o] Error 1
> error: Bad exit status from /var/tmp/rpm-tmp.43439 (%build)
> RPM build errors:
> Bad exit status from /var/tmp/rpm-tmp.43439 (%build)
I tried to build perl again an now I get this message:
`sh cflags libperl.a toke.o` toke.c
CCCMD = gcc -DPERL_CORE -c -fno-strict-aliasing
gcc: Internal error: Terminated (program cc1)
Please submit a full bug report.
See <URL:http://bugzilla.redhat.com/bugzilla/> for instructions.
make: *** [toke.o] Error 1
error: Bad exit status from /var/tmp/rpm-tmp.53242 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.53242 (%build)
> I have build perl natively with your pervious set of RedHat7.1 RPMs,
> without any problems.
> "H . J . Lu" wrote:
> > I updated a few packages, fixed a linker bug and rebuilt everything.
> > H.J.
> > ----
> > My mini-port of RedHat 7.1 is at
> > ftp://oss.sgi.com/pub/linux/mips/redhat/7.1/
> > you should be able to put a small RedHat 7.1 on the mips/mipsel box and
> > compile the rest of RedHat 7.1 yourselves.
> > Here are something you should know:
> > 1. The cross compiler hosted on RedHat 7.1/ia32 is provided as a
> > toolchain rpm. The binary rpms for the mips and mipsel cross compilers
> > are included. You will need glibc 2.2.3-11 or above to use those
> > rpms. The glibc x86 binary rpms under RPMS/i386 should be ok.
> > 2. You have to find a way to put those rpms on your machine. I use
> > network boot and NFS root to do it.
> > 3. install.tar.bz2 has some scripts to prepare NFS root and install
> > RedHat 7.1 on a hard drive.
> > 4. baseline.tar.bz2 contains the cross build tree.
> > Thanks.
> > H.J.
> _ _ ____ ___ Carsten Langgaard Mailto:email@example.com
> |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527
> | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555
> TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556
> Denmark http://www.mips.com
_ _ ____ ___ Carsten Langgaard Mailto:firstname.lastname@example.org
|\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527
| \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555
TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556