[Top] [All Lists]

XFree86 3.3.2

Subject: XFree86 3.3.2
From: Dan Aizenstros <>
Date: Fri, 09 Jun 2000 12:09:28 -0400
Organization: V3 Semiconductor
Hello all,

Is XFree86 3.3.2 which is available from SGI and other ftp sites
known to work on ATI MACH64 CT PCI video cards using the framebuffer
driver atyfb.c on MIPS?

I am running a setup that uses a QED RM5231 CPU with a Linux 2.2.12
kernel compiled with framebuffer support.  The console works fine
on the ATI board.  The Linux penguin shows up on the top left of
my screen on bootup.

When I start the XF68_FBDev server my screen goes crazy.

Here is the captured X server output:

XFree86 Version 3.3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: March 2 1998
        If the server is older than 6-12 months, or if your card is newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.1.99 mips [ELF] 
Configured drivers:
   FBDev: Server for frame buffer device
   (Patchlevel 7): mfb, iplan2p2, iplan2p4, iplan2p8, ilbm, afb, cfb8
(using VT number 2)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) Mouse: type: Microsoft, device: /dev/ttyS1, baudrate: 1200
(**) Mouse: buttons: 3
(**) FBDev: Graphics device ID: "Primary Card"
(**) FBDev: Monitor ID: "Primary Monitor"
(**) FontPath set to
(**) FBDev: Using default frame buffer video mode
(--) FBDev: Frame buffer device: ATY Mach64
(--) FBDev: Video memory: 2044K
(--) FBDev: Type 0 type_aux 0 bits_per_pixel 8
(--) FBDev: Enabled virtual desktop
(--) FBDev: Using cfb8 driver

Any help would be appreciated.

Dan Aizenstros
Software Engineer
V3 Semiconductor Corp.

<Prev in Thread] Current Thread [Next in Thread>