The Linux ramdisk is primarily intended as an auxiliary filesystem for system initialization and installation. In some case where no other block device is available the entire root filesystem may reside on a ramdisk.
In Linux/MIPS 2.4 embedded ramdisks were introduced. With embedded ramdisk the ramdisk becomes part of the vmlinux binary. This type of ramdisk is particularly useful where having separate kernel and initrd image files would be inconvenient, for example where the firmware doesn't support this. The disadvantage of course is that replacing the ramdisk may require rebuilding the entire kernel.
Embedded ramdisk support is enabled by the CONFIG_EMBEDDED_RAMDISK configuration option. If this option is enabled EMBEDDED_RAMDISK_IMAGE has to be configured to the filename of a ramdisk image. Absolute filenames are permitted. Relative filenames are relative to arch/mips/ramdisk.
Embedded ramdisk support was removed for 2.6.10-rc2. The replacement is CONFIG_INITRAMFS_SOURCE. For your convience here's the kernel configuration help text:
This can be set to either a directory containing files, etc to be included in the initramfs archive, or a file containing newline separated entries. If it is a file, it should be in the following format: # a comment file <name> <location> <mode> <uid> <gid> dir <name> <mode> <uid> <gid> nod <name> <mode> <uid> <gid> <dev_type> <maj> <min> Where: <name> name of the file/dir/nod in the archive <location> location of the file in the current filesystem <mode> mode/permissions of the file <uid> user id (0=root) <gid> group id (0=root) <dev_type> device type (b=block, c=character) <maj> major number of nod <min> minor number of nod
And here's a very simple example for such a file that describes an initramdisk:
# This is a very simple initramfs dir /dev 0755 0 0 nod /dev/console 0600 0 0 c 5 1 dir /root 0700 0 0 file /init /usr/src/hello-1.2/hello 0755 0 0
So this will populate the initrd with a /dev directory, a /dev/console character device, a /root directory and most importantly a hello world program that does to /init</init> and control the further system initialization by sending a friendly greeting to the user. A more realistic scenario would be to have <tt>/init load important modules such as necessary device drivers and filesystems needed for further system initialization. A big different between the old ramdisk scheme is that the filesystem that will be embedded into the kernel is a cpio archive, no longer the image of a filesystem on a block device.