From LinuxMIPS
Revision as of 16:12, 19 June 2006 by Headless (Talk | contribs)

Jump to: navigation, search

General Information

The RBTX4927 (RBHMA4200) and RBTX4937 (RBHMA4400) boards are based off the TMPR4927 and TMPR4937 processors respectively. These boards have 32-bit PCI slot, Fast Ethernet interface, Two Serial ports (16550 compatible) and 128 MB memory. They can operate in either BE or LE mode.

Currently, RBTX4927 is supported in Linux 2.4 and 2.6 as well, RBTX4937 is supported only in 2.6.

Booting Information

Prepare an srec image of the kernel. On the PMON prompt of the board, type load. For example:

PMON> load

Downloading from ethernet, ^C to abort
Entry address is 80297018

At this point, from the host, do the following using tftp:

# tftp
tftp> bi
tftp> put vmlinux.srec
Sent 8052180 bytes in 183.1 seconds

And at this point, you should see something similar to the following on the target:

total = 0x28f461 bytes

At this point, type "g" and you should be able to get the kernel up and running.