Difference between revisions of "Ocelot G"

From LinuxMIPS
Jump to: navigation, search
(Ocelot G is now resting on the ground of the sea.)
Line 1: Line 1:
The '''Ocelot G''' is a hotswappable 6U [[CompactPCI]] card based on a 500MHz [[RM7000|RM7000B]] processor and a Marvell [[MV-64340]] system controller featuring three gigabit ethernet interfaces.  The board has one PMC slot, two serial ports, 512MB or 1GB SDRAM ECC onboard, 512kB boot flash, 8MB MB flash.  It uses [[PMON]] like all Momentum boards.  Finally there is a watchdog timer, NVRAM and RTC.  The Marvell system controller contains multiple NICs but only one of them is connected to the front blade of the board.  A second can be connected through a transition board.
+
The '''Ocelot G''' is a hotswappable 6U [[Wikipedia:CompactPCI|CompactPCI]] card based on a 500MHz [[RM7000|RM7000B]] processor and a Marvell [[Marvell system controllers|MV-64340]] system controller featuring three gigabit ethernet interfaces.  The board has one PMC slot, two serial ports, 512MB or 1GB SDRAM ECC onboard, 512kB boot flash, 8MB MB flash.  It uses [[PMON]] like all Momentum boards.  Finally there is a watchdog timer, NVRAM and RTC.  The Marvell system controller contains multiple NICs but only one of them is connected to the front blade of the board.  A second can be connected through a transition board.
  
 
== Linux support ==
 
== Linux support ==
 
Supported in Linux 2.4 and 2.6 but suffering from bitrot.  Support did not include hotplugging or any of the other advanced features. {{removed-feature|name=Ocelot G support|date=2007-05-09 (after the 2.6.21 release)|sha=160bc18f55e938a6a967d4e6d964e09e50a8a674}}
 
Supported in Linux 2.4 and 2.6 but suffering from bitrot.  Support did not include hotplugging or any of the other advanced features. {{removed-feature|name=Ocelot G support|date=2007-05-09 (after the 2.6.21 release)|sha=160bc18f55e938a6a967d4e6d964e09e50a8a674}}

Revision as of 20:44, 7 February 2008

The Ocelot G is a hotswappable 6U CompactPCI card based on a 500MHz RM7000B processor and a Marvell MV-64340 system controller featuring three gigabit ethernet interfaces. The board has one PMC slot, two serial ports, 512MB or 1GB SDRAM ECC onboard, 512kB boot flash, 8MB MB flash. It uses PMON like all Momentum boards. Finally there is a watchdog timer, NVRAM and RTC. The Marvell system controller contains multiple NICs but only one of them is connected to the front blade of the board. A second can be connected through a transition board.

Linux support

Supported in Linux 2.4 and 2.6 but suffering from bitrot. Support did not include hotplugging or any of the other advanced features.

{{{Name}}} removed
Commit {{{Commit}}}
Date {{{Date}}}