Difference between revisions of "Ocelot 3"

From LinuxMIPS
Jump to: navigation, search
(Anotherone will bite the dust.)
 
Line 1: Line 1:
 
{{stub}}
 
{{stub}}
 +
{{feature-removal|name=Ocelot 3 support|date=September 2006 (after the 2.6.18 release)}}
  
 
Momentum '''Ocelot 3''' board configuration:
 
Momentum '''Ocelot 3''' board configuration:
Line 10: Line 11:
  
 
== Linux Support ==
 
== Linux Support ==
Linux 2.6.10-rc1 supports the Ocelot 3 with both 32-bit and 64-bit kernels. The Gigabit Ethernet Driver supports Rx NAPI, Tx side checksum offload (Zerocopy), Interrupt Coalescing and Tx side fast refilling of buffers. {{feature-removal|name=Ocelot 3 support|date=September 2006 (after the 2.6.18 release)}}
+
Linux 2.6.10-rc1 supports the Ocelot 3 with both 32-bit and 64-bit kernels. The Gigabit Ethernet Driver supports Rx NAPI, Tx side checksum offload (Zerocopy), Interrupt Coalescing and Tx side fast refilling of buffers.

Latest revision as of 06:56, 17 August 2012

This article is a stub. You can help by expanding it

Ocelot 3 support is deprecated and scheduled for removal in September 2006 (after the 2.6.18 release)

Momentum Ocelot 3 board configuration:

  • RM7900 CPU
  • MV-64440 Discovery III System Controller
  • Upto 128MB memory
  • Two PCI Busses - one 32-bit, one 64-bit. Each bus has two PCI slots.
  • Three Gigabit Ethernet Ports
  • One 16550 compatible RS-232 port.

Linux Support

Linux 2.6.10-rc1 supports the Ocelot 3 with both 32-bit and 64-bit kernels. The Gigabit Ethernet Driver supports Rx NAPI, Tx side checksum offload (Zerocopy), Interrupt Coalescing and Tx side fast refilling of buffers.