Difference between revisions of "Ocelot 3"

Revision as of 12:21, 16 May 2006 (view source) Ralf (Talk | contribs) (Mark article as stub, polish markup.) ← Older edit		Revision as of 13:17, 2 June 2006 (view source) Ralf (Talk | contribs) (Anotherone will bite the dust.) Newer edit →
Line 10:		Line 10:
	== Linux Support ==		== Linux Support ==
−	Linux 2.6.10-rc1 supports the Ocelot 3 with both 32-bit and 64-bit kernels. The Gigabit Ethernet Driver supports Rx NAPI, Tx side checksum offload (Zerocopy), Interrupt Coalescing and Tx side fast refilling of buffers.	+	Linux 2.6.10-rc1 supports the Ocelot 3 with both 32-bit and 64-bit kernels. The Gigabit Ethernet Driver supports Rx NAPI, Tx side checksum offload (Zerocopy), Interrupt Coalescing and Tx side fast refilling of buffers. {{feature-removal|name=Ocelot 3 support|date=September 2006 (after the 2.6.18 release)}}

---

Revision as of 13:17, 2 June 2006

This article is a stub. You can help by expanding it

Momentum Ocelot 3 board configuration:

• RM7900 CPU
• MV-64440 Discovery III System Controller
• Upto 128MB memory
• Two PCI Busses - one 32-bit, one 64-bit. Each bus has two PCI slots.
• Three Gigabit Ethernet Ports
• One 16550 compatible RS-232 port.

Linux Support

Linux 2.6.10-rc1 supports the Ocelot 3 with both 32-bit and 64-bit kernels. The Gigabit Ethernet Driver supports Rx NAPI, Tx side checksum offload (Zerocopy), Interrupt Coalescing and Tx side fast refilling of buffers.

Ocelot 3 support is deprecated and scheduled for removal in September 2006 (after the 2.6.18 release)