Difference between revisions of "Mtx-1"
From LinuxMIPS
| Line 1: | Line 1: | ||
| − | '''mtx-1''' is the code-name of the hardware which is marketed as MeshCube and 4G AccessCube. it is a very small (7x7x7cm) cubic embedded system based on the | + | '''mtx-1''' is the code-name of the hardware which is marketed as MeshCube and 4G AccessCube. it is a very small (7x7x7cm) cubic embedded system based on the [[AMD Alchemy]] Au1500 and targeted mainly for wireless mesh routing applications. The stackable MiniPCI architecture makes it very flexible for other applications as well. |
it features | it features | ||
| − | * 400MHz [[ | + | * 400MHz[[AMD Alchemy]] Au1500 AD stepping SOC |
* 64MB RAM | * 64MB RAM | ||
* 32MB flash | * 32MB flash | ||
* 1x 100Mbps ethernet port | * 1x 100Mbps ethernet port | ||
| − | * USB host | + | * 1x USB host |
| − | * USB device | + | * 1x USB device |
| + | * 1x serial port | ||
* stackable MiniPCI bus (up to 8 cards) | * stackable MiniPCI bus (up to 8 cards) | ||
* Power over Ethernet (802.3af) | * Power over Ethernet (802.3af) | ||
Revision as of 09:42, 3 December 2004
mtx-1 is the code-name of the hardware which is marketed as MeshCube and 4G AccessCube. it is a very small (7x7x7cm) cubic embedded system based on the AMD Alchemy Au1500 and targeted mainly for wireless mesh routing applications. The stackable MiniPCI architecture makes it very flexible for other applications as well.
it features
- 400MHzAMD Alchemy Au1500 AD stepping SOC
- 64MB RAM
- 32MB flash
- 1x 100Mbps ethernet port
- 1x USB host
- 1x USB device
- 1x serial port
- stackable MiniPCI bus (up to 8 cards)
- Power over Ethernet (802.3af)
Main Site: http://meshcube.org/meshwiki/
Manufacturer: http://4g-systems.biz
Linux support
- Linux 2.4
- Fully supported with some additional patches from http://meshcube.org/dev/kernel/
- Linux 2.6
- Still experimental
