Difference between revisions of "Mtx-1"
From LinuxMIPS
| Line 14: | Line 14: | ||
Manufacturer: http://4g-systems.biz | Manufacturer: http://4g-systems.biz | ||
| + | |||
| + | == Linux support == | ||
| + | |||
| + | ; Linux 2.4 : Fully supported with some additional patches from http://meshcube.org/dev/kernel/ | ||
| + | ; Linux 2.6 : Still experimental | ||
Revision as of 09:38, 3 December 2004
mtx-1 is the code-name of the hardware which is marketed as MeshCube and 4G AccessCube. it is a very small (7x7x7cm) cubic embedded system based on the AMD Au1500 and targeted mainly for wireless (mesh) routing applications.
it features
- 400MHz Au1500 AD stepping SOC
- 64MB RAM
- 32MB flash
- 1x 100Mbps ethernet port
- USB host
- USB device
- stackable MiniPCI bus (up to 8 cards)
- Power over Ethernet (802.3af)
Main Site: http://meshcube.org/meshwiki/
Manufacturer: http://4g-systems.biz
Linux support
- Linux 2.4
- Fully supported with some additional patches from http://meshcube.org/dev/kernel/
- Linux 2.6
- Still experimental
