Difference between revisions of "Mtx-1"

From LinuxMIPS
Jump to: navigation, search
m
m
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
'''Not available anymore -- production is stopped by 4G'''
 
'''Not available anymore -- production is stopped by 4G'''
 +
 
'''mtx-1''' is the code-name of the hardware which is marketed as MeshCube and 4G AccessCube. It is a very small (7x7x7 cm) cubic embedded system based on the [[AMD Alchemy]] Au1500 and targeted mainly for wireless mesh routing applications. The stackable MiniPCI architecture makes it very flexible for other applications as well.
 
'''mtx-1''' is the code-name of the hardware which is marketed as MeshCube and 4G AccessCube. It is a very small (7x7x7 cm) cubic embedded system based on the [[AMD Alchemy]] Au1500 and targeted mainly for wireless mesh routing applications. The stackable MiniPCI architecture makes it very flexible for other applications as well.
  
Line 6: Line 7:
 
* 64 MB RAM
 
* 64 MB RAM
 
* 32 MB flash
 
* 32 MB flash
* 1x 100 Mbps ethernet port
+
* 1x 100 Mbps Ethernet port
 
* 1x USB host
 
* 1x USB host
 
* 1x USB device
 
* 1x USB device
Line 21: Line 22:
 
== Linux support ==
 
== Linux support ==
  
; Linux 2.4 : Fully supported with some additional patches from http://meshcube.org/dev/kernel/
+
; Linux 2.4 : Fully supported with some additional patches from http://meshcube.org/dev/kernel/.
; Linux 2.6 : Fully supported with the mainline kernel
+
; Linux 2.6 : Fully supported with the mainline kernel.

Latest revision as of 17:03, 3 April 2008

Not available anymore -- production is stopped by 4G

mtx-1 is the code-name of the hardware which is marketed as MeshCube and 4G AccessCube. It is a very small (7x7x7 cm) cubic embedded system based on the AMD Alchemy Au1500 and targeted mainly for wireless mesh routing applications. The stackable MiniPCI architecture makes it very flexible for other applications as well.

It features:

  • 400 MHz AMD Alchemy Au1500 AD stepping SOC
  • 64 MB RAM
  • 32 MB flash
  • 1x 100 Mbps Ethernet port
  • 1x USB host
  • 1x USB device
  • 1x serial port
  • stackable MiniPCI bus (up to 8 cards)
  • Power over Ethernet (802.3af)
  • I2C connector
  • hardware watchdog

Main Site: http://meshcube.org/meshwiki/

Manufacturer: http://4g-systems.biz

Linux support

Linux 2.4 
Fully supported with some additional patches from http://meshcube.org/dev/kernel/.
Linux 2.6 
Fully supported with the mainline kernel.