Difference between revisions of "MIPS SEAD-3"
(moved MIPS SEAD-3 to MIPS: Undo damage to SEAD page.) |
|||
| Line 1: | Line 1: | ||
| − | + | [[Image:sead3.jpg|thumb|256px|right|SEAD-3]] | |
| + | The SEAD-3 is a mini-ATX form factor evaluation platform made by MIPS Technologies. It is meant to support the development of [[SOC]]s so it features logic analyzer connections, a [[JTAG]] port and other features to support this specific purpose. The [[M14Kc|MK14c]], [[M14KEc|MK14KEc]] or [[34K|34K]] SOC designs can be used with the SEAD-3. | ||
| + | |||
| + | == Hardware == | ||
| + | The SEAD-3 board has the following hardware: | ||
| + | *(1) microSD slot | ||
| + | *(2) 8250-class [[UART]]s | ||
| + | *USB 2.0 EHCI Host Bridge | ||
| + | *A multitude of GPIO lines | ||
| + | *Alphanumerica LCD display | ||
| + | *(2) LEDs | ||
| + | *Processor daughter card slot | ||
| + | |||
| + | == Firmware == | ||
| + | SEAD-3 uses [[YAMON]] for its firmware. The YAMON image contains Big and Little endian parts and "magic" code to determine the current endian. | ||
| + | |||
| + | == Linux support == | ||
| + | The SEAD-3 is fully supported by Linux 2.6 and current Linux 3.x kernels. The main [[Git]] tree hosted on linux-mips.org is geared towards bleeding-edge development. There is a separate [http://git.linux-mips.org/?p=linux-mti.git;a=summary tree] that is geared towards absolute stability on SEAD-3 as well as the [[MIPS Malta|Malta]] platform. It is actively maintained by MIPS Technologies, Inc. | ||
| + | |||
| + | ==Emulation== | ||
| + | The SEAD-3 board does not currently have any full-system emulation support. | ||
| + | |||
| + | ==External links== | ||
| + | * [http://www.mips.com/products/development-kits/mips-sead-3/ SEAD-3 development board] | ||
| + | [[category:evaluation board]] [[category:YAMON]] | ||
Latest revision as of 12:41, 12 October 2012
The SEAD-3 is a mini-ATX form factor evaluation platform made by MIPS Technologies. It is meant to support the development of SOCs so it features logic analyzer connections, a JTAG port and other features to support this specific purpose. The MK14c, MK14KEc or 34K SOC designs can be used with the SEAD-3.
Contents |
[edit] Hardware
The SEAD-3 board has the following hardware:
- (1) microSD slot
- (2) 8250-class UARTs
- USB 2.0 EHCI Host Bridge
- A multitude of GPIO lines
- Alphanumerica LCD display
- (2) LEDs
- Processor daughter card slot
[edit] Firmware
SEAD-3 uses YAMON for its firmware. The YAMON image contains Big and Little endian parts and "magic" code to determine the current endian.
[edit] Linux support
The SEAD-3 is fully supported by Linux 2.6 and current Linux 3.x kernels. The main Git tree hosted on linux-mips.org is geared towards bleeding-edge development. There is a separate tree that is geared towards absolute stability on SEAD-3 as well as the Malta platform. It is actively maintained by MIPS Technologies, Inc.
[edit] Emulation
The SEAD-3 board does not currently have any full-system emulation support.
