Difference between revisions of "MIPS SEAD-3"

From LinuxMIPS
Jump to: navigation, search
(moved MIPS SEAD-3 to MIPS: Undo damage to SEAD page.)
 
 
Line 1: Line 1:
#REDIRECT [[MIPS]]
+
[[Image:sead3.jpg|thumb|256px|right|SEAD-3]]
 +
The SEAD-3 is a mini-ATX form factor evaluation platform made by MIPS Technologies. It is meant to support the development of [[SOC]]s so it features logic analyzer connections, a [[JTAG]] port and other features to support this specific purpose. The [[M14Kc|MK14c]], [[M14KEc|MK14KEc]] or [[34K|34K]] SOC designs can be used with the SEAD-3.
 +
 
 +
== Hardware ==
 +
The SEAD-3 board has the following hardware:
 +
*(1) microSD slot
 +
*(2) 8250-class [[UART]]s
 +
*USB 2.0 EHCI Host Bridge
 +
*A multitude of GPIO lines
 +
*Alphanumerica LCD display
 +
*(2) LEDs
 +
*Processor daughter card slot
 +
 
 +
== Firmware ==
 +
SEAD-3 uses [[YAMON]] for its firmware. The YAMON image contains Big and Little endian parts and "magic" code to determine the current endian.
 +
 
 +
== Linux support ==
 +
The SEAD-3 is fully supported by Linux 2.6 and current Linux 3.x kernels. The main [[Git]] tree hosted on linux-mips.org is geared towards bleeding-edge development. There is a separate [http://git.linux-mips.org/?p=linux-mti.git;a=summary tree] that is geared towards absolute stability on SEAD-3 as well as the [[MIPS Malta|Malta]] platform. It is actively maintained by MIPS Technologies, Inc.
 +
 
 +
==Emulation==
 +
The SEAD-3 board does not currently have any full-system emulation support.
 +
 
 +
==External links==
 +
* [http://www.mips.com/products/development-kits/mips-sead-3/ SEAD-3 development board]
 +
[[category:evaluation board]] [[category:YAMON]]

Latest revision as of 12:41, 12 October 2012

SEAD-3

The SEAD-3 is a mini-ATX form factor evaluation platform made by MIPS Technologies. It is meant to support the development of SOCs so it features logic analyzer connections, a JTAG port and other features to support this specific purpose. The MK14c, MK14KEc or 34K SOC designs can be used with the SEAD-3.

Hardware

The SEAD-3 board has the following hardware:

  • (1) microSD slot
  • (2) 8250-class UARTs
  • USB 2.0 EHCI Host Bridge
  • A multitude of GPIO lines
  • Alphanumerica LCD display
  • (2) LEDs
  • Processor daughter card slot

Firmware

SEAD-3 uses YAMON for its firmware. The YAMON image contains Big and Little endian parts and "magic" code to determine the current endian.

Linux support

The SEAD-3 is fully supported by Linux 2.6 and current Linux 3.x kernels. The main Git tree hosted on linux-mips.org is geared towards bleeding-edge development. There is a separate tree that is geared towards absolute stability on SEAD-3 as well as the Malta platform. It is actively maintained by MIPS Technologies, Inc.

Emulation

The SEAD-3 board does not currently have any full-system emulation support.

External links