Difference between revisions of "MIPS SEAD-2"

From LinuxMIPS
Jump to: navigation, search
Line 3: Line 3:
  
 
== Linux support ==
 
== Linux support ==
Supported in Linux 2.4 and 2.6 up to 2.6.26. Will be fully supported in the Linux 3.8 release.
+
The SEAD-3 is fully supported by Linux 2.6 and current Linux 3.x kernels. The main [[Git]] tree hosted on linux-mips.org is geared towards bleeding-edge development. There is a separate [http://git.linux-mips.org/?p=linux-mti.git;a=summary tree] that is geared towards absolute stability on SEAD-3 as well as the [[MIPS Malta|Malta]] platform. It is actively maintained by MIPS Technologies, Inc.
  
 
==Emulation==
 
==Emulation==

Revision as of 20:30, 9 October 2012

SEAD-3

The SEAD-3 is an evaluation platform made by MIPS Technologies. It is meant to support the development of SOCs so it features logic analyzer connections, a JTAG port and other features to support this specific purpose. Other than that it provides a very barebone environment, two 8250-class UARTs provide the only connectivity to the outside world.

Linux support

The SEAD-3 is fully supported by Linux 2.6 and current Linux 3.x kernels. The main Git tree hosted on linux-mips.org is geared towards bleeding-edge development. There is a separate tree that is geared towards absolute stability on SEAD-3 as well as the Malta platform. It is actively maintained by MIPS Technologies, Inc.

Emulation

The SEAD-3 board does not currently have any full-system emulation support.

External links