Difference between revisions of "Load64"

From LinuxMIPS
Jump to: navigation, search
(ARCLoad update)
(ARCLoad kills Load64, film at eleven)
Line 5: Line 5:
 
It is the only bootloader that can load Linux kernels on [[Octane]] machines. It is also a convenient starting point for more advanced excursions into the land of bootloading.
 
It is the only bootloader that can load Linux kernels on [[Octane]] machines. It is also a convenient starting point for more advanced excursions into the land of bootloading.
  
Nowadays, we are working on a version of Load64 that would support all ARCS-based SGI MIPS machines (especially [[IP22|Indy]], [[IP27|Origin]], [[IP28|R10000 Indigo2]], [[IP30|Octane]] and [[IP32|O2]]). This requires support for both 32- and 64-bit platforms. A beta of '''ARCLoad''' can be downloaded here: [http://skylark.cs.put.poznan.pl/ip30/arcload-0.33.tar.bz2]. It is no longer as simple, it has an elaborate config file and in near future will be able to autodetect system configuration.
+
You don't want to use it anymore. It has been superseded by [[ARCLoad]].
 
+
Old, working load64 is here: [http://skylark.cs.put.poznan.pl/ip30/load64.tar.bz2].
+

Revision as of 16:43, 10 June 2005

Load64 is a sorry excuse for a second stage bootloader. It has no configuration, no filesystem support. It can load its kernels only from the volume header.

However it is simple, it is very fast, and requires no porting to use it on a new 64-bit ARCS platform. It is the only bootloader that can load Linux kernels on Octane machines. It is also a convenient starting point for more advanced excursions into the land of bootloading.

You don't want to use it anymore. It has been superseded by ARCLoad.