Analog SOC - Revision history

Zoobab: /* Devices based on the ADi Fusiv */

2009-12-12T13:17:44Z

‎Devices based on the ADi Fusiv

P2 at 22:10, 26 July 2007

2007-07-26T22:10:20Z

P2 at 22:09, 26 July 2007

2007-07-26T22:09:29Z

Alec v: /* Hardware */

2006-06-17T18:09:47Z

‎Hardware

Ralf: Add to SOC category

2006-05-15T12:36:28Z

Add to SOC category

Mat: /* Devices based on the ADi Fusiv */

2005-11-29T07:03:09Z

‎Devices based on the ADi Fusiv

Mat: /* Hardware */

2005-11-12T14:04:43Z

‎Hardware

Mat: some fixes

2005-11-12T11:58:40Z

some fixes

Mat: First draft, sorry for the spelling mistake and my bad english

2005-11-12T11:42:58Z

First draft, sorry for the spelling mistake and my bad english

New page

Analog Fusiv is a family of the Home Gateway processors from the [http://www.analog.com Analog Device(ADI)].

== Fusiv AT ==
[http://www.analog.com/UploadedFiles/Product_Highlights/324962436Fusiv_final.pdf Fusiv AT100/200/300 (AD6501/AD6502/AD6503)]

== Fusiv NP ==
[http://www.analog.com/Analog_Root/static/promotions/fusiv/FusivNP.pdf Fusiv NP210/220/230 (AD6843/AD6844/AD6846)]

== Fusiv VOX 150 ==
[http://www.analog.com/Analog_Root/static/promotions/fusiv/Fusiv-VX150.pdf Fusiv VOX 150 (AD6833)]

== Fusiv VOX 200 ==
[http://www.analog.com/Analog_Root/static/promotions/fusiv/Fusiv-VX200.pdf Fusiv VX 200 (AD6834)]

== Harware ==
According to [http://jonahprobell.com/lexra.html Jonah Probell] most of them run on lexra MIPS clones.

== Devices based on the ADi Fusiv ==
* [http://www.sagem.com/support/site/modele_fax.php?support=f9fd1ed6810815bca4db547297550707&page=produit&numero_type=9&produit=284 Fast 3202/Livebox]. This router is sold by lot's french ISP : [http://www.wanadoo.fr/bin/frame2.cgi?u=http%3A//assistance.wanadoo.fr/reponse1091.asp Wanado], [http://cegetel.fr/res/adsl/tel_illimite.php Cegetel], and others.

* [http://sagem.fr/index.php?id=193&L=0 3302/3303] (TO CHECK)

== Linux support ==
According to Analog, the AD6834 could be run under Vxwork or Linux.
Sagem is currently providing box with VxWork and Linux running under a [http://www.unfreeze.net/perso/cv/CV%20Detaille%20FDelizy.pdf home made Hypervisor], but they are planning to migrate to full Linux 2.6 kernel.

Some rescue software use root telnet to check the box version firmware. People discover the password with ethereal and were able to [http://livebox.forumactif.com/viewtopic.forum?t=14098 login] on Vxwork.

[root @ home]$ ps
Name Id Priority Status StackSize StackHigh StackMargin Error Delay
CLI 0x80fb4e40 171 READY 16368 1688 14680 0x3d0002 0
SntpRst 0x80fb5460 171 PEND+T 1008 280 728 0x0 42606978
tLinuxPool 0x80fb6730 135 DELAY 3264 2376 888 0x0 33
tLinuxKe 0x80fb7950 180 READY 3936 900 3036 0x0 0
tLinuxIf 0x80fb8b70 130 PEND+T 3936 1312 2624 0x3d0004 187
acfT 0x80fbcda0 171 DELAY 16384 940 15444 0x0 523
wpost 0x80fc0fd0 171 DELAY 16384 1736 14648 0x0 467
dhcp-s 0x80fda030 171 PEND 32080 3848 28232 0x0 0
rtp 0x81067aa0 129 PEND+T 7504 4680 2824 0x3d0002 1
h245Tsk 0x8106e0c0 129 PEND+T 24912 2104 22808 0x3d0002 1
q931Tsk 0x810778e0 129 PEND+T 37712 2056 35656 0x3d0002 1
cmTsk 0x81082100 129 PEND+T 41808 2168 39640 0x3d0002 17
monIf 0x810866b0 171 PEND 4080 1408 2672 0x0 0
dnsr 0x8108aa70 171 PEND+T 7504 2020 5484 0xb 1
teld 0x8108cc90 171 PEND+T 7504 3268 4236 0x3d0002 1
CnsD 0x8108deb0 172 READY 4080 1968 2112 0x3d0002 0
serd 0x8108e8d0 171 PEND 2032 332 1700 0x0 0
Logger 0x81090af0 171 PEND 8176 2544 5632 0x0 0
dynDns 0x80fa4300 171 DELAY 16368 1260 15108 0x0 4114
http 0x80fa8520 171 PEND 15696 1872 13824 0x0 0
iTsk 0x810bcb60 129 PEND 15712 1712 14000 0x0 0
ftpd 0x810c0230 171 PEND 7504 2300 5204 0x0 0
wpet 0x81164f70 128 DELAY 16368 1000 15368 0x0 1
usbd 0x8116a190 141 PEND+T 20464 456 20008 0x3d0002 1
OI_TXIP_TASK 0x8116c3b0 161 PEND 8176 256 7920 0x0 0
OI_RXIP_TASK 0x81172640 161 PEND 8176 2612 5564 0x0 0
OIRXTASK 0x81178980 142 PEND 8176 1440 6736 0x0 0
StackLoop 0x8117aba0 161 PEND+T 8176 904 7272 0x3d0004 582539
CheckWlan 0x8117e030 141 DELAY 4064 540 3524 0x0 298
tskt 0x81194950 141 PEND 16368 1204 15164 0x0 0
osif 0x811b7080 141 PEND 16368 1640 14728 0x0 0
AtmHostTsk 0x811bb4e0 128 PEND 16368 212 16156 0x0 0
BmHostTsk 0x815b85a0 131 PEND 16368 384 15984 0x0 0
apDumpInfoTsk 0x815c2d60 171 DELAY 16368 252 16116 0x0 8
PstnTask 0x816233c0 161 PEND 8176 396 7780 0x0 0
RelayTask 0x816255e0 161 PEND 8176 348 7828 0x0 0
PppResetTask 0x81627800 161 PEND 8176 280 7896 0x0 0
tmrs 0x817fdd40 128 PEND 7520 1512 6008 0x2a 0
tExcTask 0x817f4cb0 0 PEND 7984 536 7448 0x3006b 0

Rsh was open, and people were able to run command and [http://livebox.ammoniac.net/sagem/LB_cramfs.tar.gz dump the files] of the Linux part.

[root @ home]$ rsh -o -u root 192.168.70.2 dmesg
Loading LX4189 MMU routines.
CPU revision is: 0000c401
Primary instruction cache 16kb, linesize 32 bytes
Primary data cache 16kb, linesize 32 bytes
Linux version 2.4.18 (delizy@VZY08001) (gcc version 2.95.3 20010315 (release/MontaVista)) #93 Mon Jun 6 13:42:05 CEST 2005
Detected 16MB of memory
System clock is 100 MHz
Determined physical RAM map:
memory: 01800000 @ 00000000 (reserved)
memory: 00002000 @ 01800000 (reserved)
memory: 007fe000 @ 01802000 (usable)
memory: 00800000 @ 1f800000 (ROM data)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: auto debug rw root=/dev/mtdblock2
Timers are getting initalized
Calibrating delay loop... 75.36 BogoMIPS
Memory: 5916k/8184k available (1446k kernel code, 2268k reserved, 137k data, 44k init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
Starting idle task
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 512K size 1024 blocksize
loop: loaded (max 8 devices)
ethvl: net device ethvl0 registered.
physmap flash device: 800000 at 1f800000
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
AD6843 Residential Gateway flash probe(0x1f800000,8388608,2): 800000 at 1f800000
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
Creating 8 MTD partitions on "Analog Devices AD6843 Residential Gateway":
0x00000000-0x00030000 : "Base"
0x00030000-0x00130000 : "App1Rescue"
0x00130000-0x00130100 : "Header"
0x00130100-0x00380000 : "Root"
0x00380000-0x00430000 : "DSL1"
0x00430000-0x00700000 : "App2"
0x00700000-0x00780000 : "Jffs2"
0x00780000-0x00800000 : "DSL2"
ad6843_mtd_init Root partition found at : mtd->index(5)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 44k freed
Sagem init : /etc/sagem_release present, root filesystem seems ok ...
Sagem Release is : Sagem RG1V1 raynaud@VZY08001 17062005_16H54
Warning: unable to open an initial console.
Running /sbin/init

[root @ home]$ rsh -o -u root 192.168.70.2 ps
PID TTY Uid Size State Command
1 root 1112 S init
2 root 0 S [keventd]
3 root 0 S [ksoftirqd_CPU0]
4 root 0 S [kswapd]
5 root 0 S [bdflush]
6 root 0 S [kupdated]
7 root 0 S [mtdblockd]
13 root 0 S [jffs2_gcd_mtd8]
26 root 1116 S /bin/sh /etc/init.d/rc.d/S20telnetd start
36 root 1116 S /bin/sh /etc/init.d/rc.d/S40inetd start
37 root 1312 S inetd -R 1000 --debug
19676 root 1100 S telnetd -debug

Unfortunately, there is no Linux sources for this SoC in the public access at the present time.

@@ Line 32: / Line 32: @@
 * Sagem [http://sagem.fr/index.php?id=193&L=0 3302/3303] (TO CHECK)
 * Comtrend [http://www.comtrend.com/index.php?module=products&op=show&sn=43 NexusLink]
 * Netopia [http://www.netopia.com/equipment/products/miavo/ MiAVo]
 * [http://wwwen.zte.com.cn:8080/English/index.jsp ZTE]
 == Linux support ==

← Older revision		Revision as of 22:10, 26 July 2007
Line 1:		Line 1:
−	Analog Fusiv is a family of the Home Gateway processors from the [http://www.analog.com Analog Device(ADI)]. It was bought by [http://www.ikanos.com/ Ikanos communication]	+	Analog Fusiv is a family of the Home Gateway processors from the [http://www.analog.com Analog Device(ADI)]. It was bought by [http://www.ikanos.com/ Ikanos communication] beginning of 2006.

	== Fusiv AT ==		== Fusiv AT ==

← Older revision		Revision as of 22:09, 26 July 2007
Line 1:		Line 1:
−	Analog Fusiv is a family of the Home Gateway processors from the [http://www.analog.com Analog Device(ADI)].	+	Analog Fusiv is a family of the Home Gateway processors from the [http://www.analog.com Analog Device(ADI)]. It was bought by [http://www.ikanos.com/ Ikanos communication]

	== Fusiv AT ==		== Fusiv AT ==

@@ Line 15: / Line 15: @@
 == Hardware ==
-According to [http://jonahprobell.com/lexra.html Jonah Probell] most of them runs on lexra MIPS clones.
+According to [http://jonahprobell.com/lexra.html Jonah Probell] most of them runs on [[Lexra]] MIPS clones.
 From [http://www.analog.com/images/Product_Descriptions/20870450FusivDiagram900x645.jpg AD6503 diagram] and others diagram found in pdf of each chips, the fusiv platform can support :

← Older revision		Revision as of 12:36, 15 May 2006
Line 176:		Line 176:

	Unfortunately, there is no Linux sources for this SoC in the public access at the present time, nor know people that have a Livebox and ask for the sources.		Unfortunately, there is no Linux sources for this SoC in the public access at the present time, nor know people that have a Livebox and ask for the sources.
		+
		+	[[Category:SOC]]

← Older revision		Revision as of 07:03, 29 November 2005
Line 32:		Line 32:

	* Sagem [http://sagem.fr/index.php?id=193&L=0 3302/3303] (TO CHECK)		* Sagem [http://sagem.fr/index.php?id=193&L=0 3302/3303] (TO CHECK)
		+
		+	* Comtrend [http://www.comtrend.com/index.php?module=products&op=show&sn=43 NexusLink]
		+
		+	* Netopia [http://www.netopia.com/equipment/products/miavo/ MiAVo]
		+
		+	* [http://wwwen.zte.com.cn:8080/English/index.jsp ZTE]

	== Linux support ==		== Linux support ==

@@ Line 14: / Line 14: @@
-== Harware ==
+== Hardware ==
-According to [http://jonahprobell.com/lexra.html Jonah Probell] most of them run on lexra MIPS clones.
+According to [http://jonahprobell.com/lexra.html Jonah Probell] most of them runs on lexra MIPS clones.
 == Devices based on the ADi Fusiv ==
-* [http://www.sagem.com/support/site/modele_fax.php?support=f9fd1ed6810815bca4db547297550707&page=produit&numero_type=9&produit=284 Fast 3202/Livebox]. This router is sold by lot's french ISP : [http://www.wanadoo.fr/bin/frame2.cgi?u=http%3A//assistance.wanadoo.fr/reponse1091.asp Wanado], [http://cegetel.fr/res/adsl/tel_illimite.php Cegetel], and others.
+* Sagem [http://www.sagem.com/support/site/modele_fax.php?support=f9fd1ed6810815bca4db547297550707&page=produit&numero_type=9&produit=284 Fast 3202/Livebox]. This router is sold by lot's french ISP : [http://www.wanadoo.fr/bin/frame2.cgi?u=http%3A//assistance.wanadoo.fr/reponse1091.asp Wanado], [http://cegetel.fr/res/adsl/tel_illimite.php Cegetel], and others.
-* [http://sagem.fr/index.php?id=193&L=0 3302/3303] (TO CHECK)
+* Sagem [http://sagem.fr/index.php?id=193&L=0 3302/3303] (TO CHECK)
 == Linux support ==
-According to Analog, the AD6834 could be run under Vxwork or Linux.
+According to Analog, the AD6833/AD6834 could be run under Vxwork or Linux.
 Sagem is currently providing box with VxWork and Linux running under a [http://www.unfreeze.net/perso/cv/CV%20Detaille%20FDelizy.pdf home made Hypervisor], but they are planning to migrate to full Linux 2.6 kernel.
-Some rescue software use root telnet to check the box version firmware. People discover the password with ethereal and were able to [http://livebox.forumactif.com/viewtopic.forum?t=14098 login] on Vxwork.
+Some rescue softwares use root telnet to check the box version firmware. People discovered the password with ethereal and were able to [http://livebox.forumactif.com/viewtopic.forum?t=14098 login] on Vxwork.
@@ Line 72: / Line 73: @@
-Rsh was open, and people were able to run command and [http://livebox.ammoniac.net/sagem/LB_cramfs.tar.gz dump the files] of the Linux part.
+Rsh was open, and people were able to run commands and [http://livebox.ammoniac.net/sagem/LB_cramfs.tar.gz dump the files] of the Linux part.
@@ Line 157: / Line 158: @@
-Unfortunately, there is no Linux sources for this SoC in the public access at the present time.
+Unfortunately, there is no Linux sources for this SoC in the public access at the present time, nor know people that have a Livebox and ask for the sources.