linux-mips
[Top] [All Lists]

[PATCH 1/4] sead3-setup: allow cmdline/env to change memory size using m

To: <linux-mips@linux-mips.org>
Subject: [PATCH 1/4] sead3-setup: allow cmdline/env to change memory size using memsize param
From: Qais Yousef <qais.yousef@imgtec.com>
Date: Fri, 6 Dec 2013 11:00:42 +0000
Cc: Qais Yousef <qais.yousef@imgtec.com>
In-reply-to: <1386327645-17571-1-git-send-email-qais.yousef@imgtec.com>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1386327645-17571-1-git-send-email-qais.yousef@imgtec.com>
Sender: linux-mips-bounce@linux-mips.org
if the user sets memsize parameter in commandline or bootloader
environment, we use it to modify the built-in dtb memory size

Signed-off-by: Qais Yousef <qais.yousef@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
---
 arch/mips/Kconfig                 |    1 +
 arch/mips/mti-sead3/Makefile      |    2 +
 arch/mips/mti-sead3/sead3-setup.c |   68 +++++++++++++++++++++++++++++++++++++
 3 files changed, 71 insertions(+), 0 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9dbd904..3bc8088 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -347,6 +347,7 @@ config MIPS_SEAD3
        select DMA_NONCOHERENT
        select IRQ_CPU
        select IRQ_GIC
+       select LIBFDT
        select MIPS_MSC
        select SYS_HAS_CPU_MIPS32_R1
        select SYS_HAS_CPU_MIPS32_R2
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index be11420..071786f 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -21,5 +21,7 @@ obj-$(CONFIG_EARLY_PRINTK)    += sead3-console.o
 obj-$(CONFIG_USB_EHCI_HCD)     += sead3-ehci.o
 obj-$(CONFIG_OF)               += sead3.dtb.o
 
+CFLAGS_sead3-setup.o = -I$(src)/../../../scripts/dtc/libfdt
+
 $(obj)/%.dtb: $(obj)/%.dts
        $(call if_changed,dtc)
diff --git a/arch/mips/mti-sead3/sead3-setup.c 
b/arch/mips/mti-sead3/sead3-setup.c
index 928ba84..a499f99 100644
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ b/arch/mips/mti-sead3/sead3-setup.c
@@ -4,13 +4,16 @@
  * for more details.
  *
  * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
  */
 #include <linux/init.h>
+#include <linux/libfdt.h>
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
 #include <linux/bootmem.h>
 
 #include <asm/prom.h>
+#include <asm/fw/fw.h>
 
 #include <asm/mips-boards/generic.h>
 
@@ -19,8 +22,73 @@ const char *get_system_type(void)
        return "MIPS SEAD3";
 }
 
+static uint32_t get_memsize_from_cmdline(void)
+{
+       int memsize = 0;
+       char *p = arcs_cmdline;
+       char *s = "memsize=";
+
+       p = strstr(p, s);
+       if (p) {
+               p += strlen(s);
+               memsize = memparse(p, NULL);
+       }
+
+       return memsize;
+}
+
+static uint32_t get_memsize_from_env(void)
+{
+       int memsize = 0;
+       char *p;
+
+       p = fw_getenv("memsize");
+       if (p)
+               memsize = memparse(p, NULL);
+
+       return memsize;
+}
+
+static uint32_t get_memsize(void)
+{
+       uint32_t memsize;
+
+       memsize = get_memsize_from_cmdline();
+       if (memsize)
+               return memsize;
+
+       return get_memsize_from_env();
+}
+
+static void __init parse_memsize_param(void)
+{
+       int offset;
+       const uint64_t *prop_value;
+       int prop_len;
+       uint32_t memsize = get_memsize();
+
+       if (!memsize)
+               return;
+
+       offset = fdt_path_offset(&__dtb_start, "/memory");
+       if (offset > 0) {
+               uint64_t new_value;
+               /*
+                * reg contains 2 32-bits BE values, offset and size. We just
+                * want to replace the size value without affecting the offset
+                */
+               prop_value = fdt_getprop(&__dtb_start, offset, "reg", 
&prop_len);
+               new_value = be64_to_cpu(*prop_value);
+               new_value =  (new_value & ~0xffffffffllu) | memsize;
+               fdt_setprop_inplace_u64(&__dtb_start, offset, "reg", new_value);
+       }
+}
+
 void __init plat_mem_setup(void)
 {
+       /* allow command line/bootloader env to override memory size in DT */
+       parse_memsize_param();
+
        /*
         * Load the builtin devicetree. This causes the chosen node to be
         * parsed resulting in our memory appearing
-- 
1.7.1



<Prev in Thread] Current Thread [Next in Thread>