linux-mips
[Top] [All Lists]

[PATCH V3] MIPS: BCM47XX: Prepare support for LEDs

To: linux-mips@linux-mips.org
Subject: [PATCH V3] MIPS: BCM47XX: Prepare support for LEDs
From: Rafał Miłecki <zajec5@gmail.com>
Date: Wed, 6 Nov 2013 22:11:14 +0100
Cc: Hauke Mehrtens <hauke@hauke-m.de>, Rafał Miłecki <zajec5@gmail.com>
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-type:content-transfer-encoding; bh=oUbdnmm49C6/r6GgvojzONQ2fJQAqbn3+qhJkMO66h4=; b=uQCzI0WKCyFYI3egsOZPmOmeHi6TbcU9WVDN3abOUEfWezO3Xg2xAkjNWPMjp+UY7W BmnczgOy93QQsNFQL7j60as7e7cuq/jh9ZWXYlhljJjnXbN6iCJmE5TY32bEPLH/rzsQ stnSnDBZp/hdvlBjY29XlghplSahGrzaJHdzFE+Fsuf8a0Q6o9TSP0pEmPNIYUGw7LMU Ja6nCV6ljablx5T2+Pm+XrWSpgtKFC4Os6HnkB1/BnM8SJ64dtqR0C1vJ4C61iBtyOs5 8f3CpxTE1S/AwZUnKXlskpRFEJVjwLuh+rJgpwRXPOqLZFT9b/6g3EFZvXCwRiIn6Bow XwIQ==
In-reply-to: <1383771746-31119-1-git-send-email-zajec5@gmail.com>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1383771746-31119-1-git-send-email-zajec5@gmail.com>
Sender: linux-mips-bounce@linux-mips.org
So far this is mostly just a proof of concept, database consists of a
single device. Creating a nice iterateable array wasn't an option
because devices have different amount of LEDs. And we don't want to
waste memory just because of support for a device with dozens on LEDs.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
V2: use bcm47xx_private.h instead of ugly define in setup.c
V3: don't add #include <bcm47xx_data.h> in setup.c. No need to.
---
 arch/mips/bcm47xx/Kconfig           |    2 +
 arch/mips/bcm47xx/Makefile          |    2 +-
 arch/mips/bcm47xx/bcm47xx_private.h |    9 +++++
 arch/mips/bcm47xx/leds.c            |   73 +++++++++++++++++++++++++++++++++++
 arch/mips/bcm47xx/setup.c           |    5 +++
 5 files changed, 90 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/bcm47xx/bcm47xx_private.h
 create mode 100644 arch/mips/bcm47xx/leds.c

diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
index ba61192..81a3d28 100644
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -12,6 +12,7 @@ config BCM47XX_SSB
        select SSB_PCICORE_HOSTMODE if PCI
        select SSB_DRIVER_GPIO
        select GPIOLIB
+       select LEDS_GPIO_REGISTER
        default y
        help
         Add support for old Broadcom BCM47xx boards with Sonics Silicon 
Backplane support.
@@ -28,6 +29,7 @@ config BCM47XX_BCMA
        select BCMA_DRIVER_PCI_HOSTMODE if PCI
        select BCMA_DRIVER_GPIO
        select GPIOLIB
+       select LEDS_GPIO_REGISTER
        default y
        help
         Add support for new Broadcom BCM47xx boards with Broadcom specific 
Advanced Microcontroller Bus.
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index 571c15e..8d4a66c 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,6 +4,6 @@
 #
 
 obj-y                          += irq.o nvram.o prom.o serial.o setup.o time.o 
sprom.o
-obj-y                          += board.o
+obj-y                          += board.o leds.o
 obj-y                          += gpio.o
 obj-y                          += cfe_env.o
diff --git a/arch/mips/bcm47xx/bcm47xx_private.h 
b/arch/mips/bcm47xx/bcm47xx_private.h
new file mode 100644
index 0000000..1a1e600
--- /dev/null
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -0,0 +1,9 @@
+#ifndef LINUX_BCM47XX_PRIVATE_H_
+#define LINUX_BCM47XX_PRIVATE_H_
+
+#include <linux/kernel.h>
+
+/* leds.c */
+void __init bcm47xx_leds_register(void);
+
+#endif
diff --git a/arch/mips/bcm47xx/leds.c b/arch/mips/bcm47xx/leds.c
new file mode 100644
index 0000000..6a49d4c
--- /dev/null
+++ b/arch/mips/bcm47xx/leds.c
@@ -0,0 +1,73 @@
+#include "bcm47xx_private.h"
+
+#include <linux/leds.h>
+#include <bcm47xx_board.h>
+
+static const struct gpio_led
+bcm47xx_leds_netgear_wndr4500_v1_leds[] __initconst = {
+       {
+               .name           = "bcm47xx:green:wps",
+               .gpio           = 1,
+               .active_low     = 1,
+               .default_state  = LEDS_GPIO_DEFSTATE_KEEP,
+       },
+       {
+               .name           = "bcm47xx:green:power",
+               .gpio           = 2,
+               .active_low     = 1,
+               .default_state  = LEDS_GPIO_DEFSTATE_KEEP,
+       },
+       {
+               .name           = "bcm47xx:orange:power",
+               .gpio           = 3,
+               .active_low     = 1,
+               .default_state  = LEDS_GPIO_DEFSTATE_KEEP,
+       },
+       {
+               .name           = "bcm47xx:green:usb1",
+               .gpio           = 8,
+               .active_low     = 1,
+               .default_state  = LEDS_GPIO_DEFSTATE_KEEP,
+       },
+       {
+               .name           = "bcm47xx:green:2ghz",
+               .gpio           = 9,
+               .active_low     = 1,
+               .default_state  = LEDS_GPIO_DEFSTATE_KEEP,
+       },
+       {
+               .name           = "bcm47xx:blue:5ghz",
+               .gpio           = 11,
+               .active_low     = 1,
+               .default_state  = LEDS_GPIO_DEFSTATE_KEEP,
+       },
+       {
+               .name           = "bcm47xx:green:usb2",
+               .gpio           = 14,
+               .active_low     = 1,
+               .default_state  = LEDS_GPIO_DEFSTATE_KEEP,
+       },
+};
+
+static struct gpio_led_platform_data bcm47xx_leds_pdata;
+
+#define bcm47xx_set_pdata(dev_leds) do {                               \
+       bcm47xx_leds_pdata.leds = dev_leds;                             \
+       bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds);             \
+} while (0)
+
+void __init bcm47xx_leds_register(void)
+{
+       enum bcm47xx_board board = bcm47xx_board_get();
+
+       switch (board) {
+       case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
+               bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500_v1_leds);
+               break;
+       default:
+               pr_debug("No LEDs configuration found for this device\n");
+               return;
+       }
+
+       gpio_led_register_device(-1, &bcm47xx_leds_pdata);
+}
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 4b1e229..5291bda 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -26,6 +26,8 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include "bcm47xx_private.h"
+
 #include <linux/export.h>
 #include <linux/types.h>
 #include <linux/ssb/ssb.h>
@@ -272,6 +274,9 @@ static int __init bcm47xx_register_bus_complete(void)
                break;
 #endif
        }
+
+       bcm47xx_leds_register();
+
        return 0;
 }
 device_initcall(bcm47xx_register_bus_complete);
-- 
1.7.10.4


<Prev in Thread] Current Thread [Next in Thread>