linux-mips
[Top] [All Lists]

[PATCH 2/2] MIPS: BCM47XX: fix detected clock on Asus WL520GC and WL520G

To: ralf@linux-mips.org
Subject: [PATCH 2/2] MIPS: BCM47XX: fix detected clock on Asus WL520GC and WL520GU
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed, 18 Sep 2013 13:33:00 +0200
Cc: linux-mips@linux-mips.org, Hauke Mehrtens <hauke@hauke-m.de>
In-reply-to: <1379503980-9156-1-git-send-email-hauke@hauke-m.de>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1379503980-9156-1-git-send-email-hauke@hauke-m.de>
Sender: linux-mips-bounce@linux-mips.org
The Asus WL520GC and WL520GU are based on the BCM5354 and clocked at
200MHz, but they do not have a clkfreq nvram variable set to the
correct value. This adds a workaround for these devices.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---

This depends on MIPS: BCM47XX: add board detection

 arch/mips/bcm47xx/time.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/mips/bcm47xx/time.c b/arch/mips/bcm47xx/time.c
index 5e5d797..2c85d92 100644
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -28,6 +28,7 @@
 #include <asm/time.h>
 #include <bcm47xx.h>
 #include <bcm47xx_nvram.h>
+#include <bcm47xx_board.h>
 
 void __init plat_time_init(void)
 {
@@ -35,6 +36,7 @@ void __init plat_time_init(void)
        u16 chip_id = 0;
        char buf[10];
        int len;
+       enum bcm47xx_board board = bcm47xx_board_get();
 
        /*
         * Use deterministic values for initial counter interrupt
@@ -64,6 +66,15 @@ void __init plat_time_init(void)
                        hz = 100000000;
        }
 
+       switch (board) {
+       case BCM47XX_BOARD_ASUS_WL520GC:
+       case BCM47XX_BOARD_ASUS_WL520GU:
+               hz = 100000000;
+               break;
+       default:
+               break;
+       }
+
        if (!hz)
                hz = 100000000;
 
-- 
1.7.10.4


<Prev in Thread] Current Thread [Next in Thread>