linux-mips
[Top] [All Lists]

Re: [PATCH 0/6] Convert JZ4740 to dmaengine

To: Lars-Peter Clausen <lars@metafoo.de>
Subject: Re: [PATCH 0/6] Convert JZ4740 to dmaengine
From: Vinod Koul <vinod.koul@intel.com>
Date: Fri, 21 Jun 2013 19:43:30 +0530
Cc: Ralf Baechle <ralf@linux-mips.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Maarten ter Huurne <maarten@treewalker.org>, linux-mips@linux-mips.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org
In-reply-to: <1369931105-28065-1-git-send-email-lars@metafoo.de>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1369931105-28065-1-git-send-email-lars@metafoo.de>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mutt/1.5.20 (2009-06-14)
On Thu, May 30, 2013 at 06:24:59PM +0200, Lars-Peter Clausen wrote:
> Hi,
> 
> This series replaces the custom JZ4740 DMA API with a dmaengine driver. This 
> is
> done in 3 steps:
>       1) Add a dmaengine driver which wraps the custom JZ4740 DMA API
>       2) Update all users of the JZ4740 DMA API to use dmaengine instead
>       3) Remove the custom API and move all direct hardware access to the
>          dmaengine driver.
> 
> The first two patches in the series also make sure that the clock of the DMA
> core is enabled.
> 
> Since the patches in this series depend on each other I'd prefer if they could
> all go through the DMA tree.
> 
> There are a few minor changes to the patch 3 in v2 of this series, all other
> patches are identical to v1.

Applied all expect the "ASoC: jz4740: Use the generic dmaengine PCM driver". Can
you rebase that on slave dma-next and resend

Fixed up struct alignment manually in 4th one

--
~Vinod
> 
> - Lars
> 
> Lars-Peter Clausen (4):
>   dma: Add a jz4740 dmaengine driver
>   MIPS: jz4740: Register jz4740 DMA device
>   ASoC: jz4740: Use the generic dmaengine PCM driver
>   MIPS: jz4740: Remove custom DMA API
> 
> Maarten ter Huurne (2):
>   MIPS: jz4740: Correct clock gate bit for DMA controller
>   MIPS: jz4740: Acquire and enable DMA controller clock
> 
>  arch/mips/include/asm/mach-jz4740/dma.h      |  56 ---
>  arch/mips/include/asm/mach-jz4740/platform.h |   1 +
>  arch/mips/jz4740/Makefile                    |   2 +-
>  arch/mips/jz4740/board-qi_lb60.c             |   1 +
>  arch/mips/jz4740/clock.c                     |   2 +-
>  arch/mips/jz4740/dma.c                       | 287 -------------
>  arch/mips/jz4740/platform.c                  |  21 +
>  drivers/dma/Kconfig                          |   6 +
>  drivers/dma/Makefile                         |   1 +
>  drivers/dma/dma-jz4740.c                     | 617 
> +++++++++++++++++++++++++++
>  sound/soc/jz4740/Kconfig                     |   1 +
>  sound/soc/jz4740/jz4740-i2s.c                |  48 +--
>  sound/soc/jz4740/jz4740-pcm.c                | 310 +-------------
>  sound/soc/jz4740/jz4740-pcm.h                |  20 -
>  14 files changed, 676 insertions(+), 697 deletions(-)
>  delete mode 100644 arch/mips/jz4740/dma.c
>  create mode 100644 drivers/dma/dma-jz4740.c
>  delete mode 100644 sound/soc/jz4740/jz4740-pcm.h
> 
> -- 
> 1.8.2.1
> 

-- 

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [PATCH 0/6] Convert JZ4740 to dmaengine, Vinod Koul <=