linux-mips
[Top] [All Lists]

[PATCH 2/7] MIPS: BCM63XX: select BOOT_RAW

To: ralf@linux-mips.org
Subject: [PATCH 2/7] MIPS: BCM63XX: select BOOT_RAW
From: "Florian Fainelli" <florian@openwrt.org>
Date: Tue, 18 Jun 2013 18:55:39 +0100
Cc: linux-mips@linux-mips.org, cernekee@gmail.com, jogo@openwrt.org, "Florian Fainelli" <florian@openwrt.org>
In-reply-to: <1371578144-12794-1-git-send-email-florian@openwrt.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1371578144-12794-1-git-send-email-florian@openwrt.org>
Sender: linux-mips-bounce@linux-mips.org
Enabling BOOT_RAW is mandatory to get a binary image (objcopy from ELF
to binary) to work. This does not affect the ELF kernels which are used
by CFE on BCM63XX DSL platforms, but is going to be necessary to support
BCM63XX on Cable Modem chips such as BCM3368.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
 arch/mips/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 30d200d..27d79ff 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -121,6 +121,7 @@ config BCM47XX
 
 config BCM63XX
        bool "Broadcom BCM63XX based boards"
+       select BOOT_RAW
        select CEVT_R4K
        select CSRC_R4K
        select DMA_NONCOHERENT
-- 
1.8.1.2



<Prev in Thread] Current Thread [Next in Thread>