linux-mips
[Top] [All Lists]

[PATCH V2 3/6] DT: MIPS: ralink: clean up RT3050 dtsi and dts file

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH V2 3/6] DT: MIPS: ralink: clean up RT3050 dtsi and dts file
From: John Crispin <blogic@openwrt.org>
Date: Tue, 16 Apr 2013 11:12:39 +0200
Cc: linux-mips@linux-mips.org, devicetree-discuss@lists.ozlabs.org, John Crispin <blogic@openwrt.org>
In-reply-to: <1366103562-21463-1-git-send-email-blogic@openwrt.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1366103562-21463-1-git-send-email-blogic@openwrt.org>
Sender: linux-mips-bounce@linux-mips.org
* remove nodes for cores whose drivers are not upstream yet
* add compat string for an additional soc
* fix a whitespace error
* move chosen node from dtsi to dts file

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/ralink/dts/rt3050.dtsi     |   52 ++--------------------------------
 arch/mips/ralink/dts/rt3052_eval.dts |   10 ++-----
 2 files changed, 4 insertions(+), 58 deletions(-)

diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
index 069d066..ef7da1e 100644
--- a/arch/mips/ralink/dts/rt3050.dtsi
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -1,7 +1,7 @@
 / {
        #address-cells = <1>;
        #size-cells = <1>;
-       compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
+       compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", 
"ralink,rt3350-soc";
 
        cpus {
                cpu@0 {
@@ -9,10 +9,6 @@
                };
        };
 
-       chosen {
-               bootargs = "console=ttyS0,57600 init=/init";
-       };
-
        cpuintc: cpuintc@0 {
                #address-cells = <0>;
                #interrupt-cells = <1>;
@@ -23,7 +19,7 @@
        palmbus@10000000 {
                compatible = "palmbus";
                reg = <0x10000000 0x200000>;
-                ranges = <0x0 0x10000000 0x1FFFFF>;
+               ranges = <0x0 0x10000000 0x1FFFFF>;
 
                #address-cells = <1>;
                #size-cells = <1>;
@@ -33,11 +29,6 @@
                        reg = <0x0 0x100>;
                };
 
-               timer@100 {
-                       compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
-                       reg = <0x100 0x100>;
-               };
-
                intc: intc@200 {
                        compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
                        reg = <0x200 0x100>;
@@ -54,45 +45,6 @@
                        reg = <0x300 0x100>;
                };
 
-               gpio0: gpio@600 {
-                       compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
-                       reg = <0x600 0x34>;
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       ralink,ngpio = <24>;
-                       ralink,regs = [ 00 04 08 0c
-                                       20 24 28 2c
-                                       30 34 ];
-               };
-
-               gpio1: gpio@638 {
-                       compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
-                       reg = <0x638 0x24>;
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       ralink,ngpio = <16>;
-                       ralink,regs = [ 00 04 08 0c
-                                       10 14 18 1c
-                                       20 24 ];
-               };
-
-               gpio2: gpio@660 {
-                       compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
-                       reg = <0x660 0x24>;
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       ralink,ngpio = <12>;
-                       ralink,regs = [ 00 04 08 0c
-                                       10 14 18 1c
-                                       20 24 ];
-               };
-
                uartlite@c00 {
                        compatible = "ralink,rt3052-uart", 
"ralink,rt2880-uart", "ns16550a";
                        reg = <0xc00 0x100>;
diff --git a/arch/mips/ralink/dts/rt3052_eval.dts 
b/arch/mips/ralink/dts/rt3052_eval.dts
index 148a590..df17f5f 100644
--- a/arch/mips/ralink/dts/rt3052_eval.dts
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
@@ -3,8 +3,6 @@
 /include/ "rt3050.dtsi"
 
 / {
-       #address-cells = <1>;
-       #size-cells = <1>;
        compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
        model = "Ralink RT3052 evaluation board";
 
@@ -12,12 +10,8 @@
                reg = <0x0 0x2000000>;
        };
 
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmmux = "uartlite", "spi";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <0>;
-               };
+       chosen {
+               bootargs = "console=ttyS0,57600";
        };
 
        cfi@1f000000 {
-- 
1.7.10.4


<Prev in Thread] Current Thread [Next in Thread>