linux-mips
[Top] [All Lists]

Re: [PATCH 3/7] MIPS: ralink: add memory definition for RT305x

To: John Crispin <blogic@openwrt.org>
Subject: Re: [PATCH 3/7] MIPS: ralink: add memory definition for RT305x
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Mon, 15 Apr 2013 15:29:42 +0400
Cc: Ralf Baechle <ralf@linux-mips.org>, linux-mips@linux-mips.org
In-reply-to: <1366022494-8355-3-git-send-email-blogic@openwrt.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Organization: Cogent Embedded
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1366022494-8355-1-git-send-email-blogic@openwrt.org> <1366022494-8355-3-git-send-email-blogic@openwrt.org>
Sender: linux-mips-bounce@linux-mips.org
User-agent: Mozilla/5.0 (Windows NT 5.1; rv:17.0) Gecko/20130328 Thunderbird/17.0.5
Hello.

On 15-04-2013 14:41, John Crispin wrote:

Populate struct soc_info with the data that describes our RAM window.

As memory detection fails on RT5350 we read the amount of available memory
from the system controller.

Signed-off-by: John Crispin <blogic@openwrt.org>
---
  arch/mips/include/asm/mach-ralink/rt305x.h |    6 ++++
  arch/mips/ralink/rt305x.c                  |   45 ++++++++++++++++++++++++++++
  2 files changed, 51 insertions(+)

diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h 
b/arch/mips/include/asm/mach-ralink/rt305x.h
index 80cda8a..e68afef 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -157,4 +157,10 @@ static inline int soc_is_rt5350(void)
  #define RT3352_RSTCTRL_UDEV           BIT(25)
  #define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10)

+#define RT305X_SDRAM_BASE              0x00000000
+#define RT305X_MEM_SIZE_MIN            (2 * 1024 * 1024)
+#define RT305X_MEM_SIZE_MAX            (64 * 1024 * 1024)
+#define RT3352_MEM_SIZE_MIN            (2 * 1024 * 1024)
+#define RT3352_MEM_SIZE_MAX            (256 * 1024 * 1024)
+
  #endif
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index e9dbf8c..da85f10 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -122,6 +122,40 @@ struct ralink_pinmux rt_gpio_pinmux = {
        .wdt_reset = rt305x_wdt_reset,
  };

+static unsigned long rt5350_get_mem_size(void)
+{
+       void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
+       unsigned long ret;
+       u32 t;
+
+       t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
+       t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
+               RT5350_SYSCFG0_DRAM_SIZE_MASK;
+
+       switch (t) {
+       case RT5350_SYSCFG0_DRAM_SIZE_2M:
+               ret = 2 * 1024 * 1024;
+               break;
+       case RT5350_SYSCFG0_DRAM_SIZE_8M:
+               ret = 8 * 1024 * 1024;
+               break;
+       case RT5350_SYSCFG0_DRAM_SIZE_16M:
+               ret = 16 * 1024 * 1024;
+               break;
+       case RT5350_SYSCFG0_DRAM_SIZE_32M:
+               ret = 32 * 1024 * 1024;
+               break;
+       case RT5350_SYSCFG0_DRAM_SIZE_64M:
+               ret = 64 * 1024 * 1024;
+               break;
+       default:

   Maybe it's worth including <linux/sizes.h> as well?

WBR, Sergei


<Prev in Thread] Current Thread [Next in Thread>