linux-mips
[Top] [All Lists]

[PATCH V2 10/16] MIPS: ralink: add rt2880 dts files

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH V2 10/16] MIPS: ralink: add rt2880 dts files
From: John Crispin <blogic@openwrt.org>
Date: Fri, 12 Apr 2013 09:27:37 +0200
Cc: linux-mips@linux-mips.org, John Crispin <blogic@openwrt.org>
In-reply-to: <1365751663-5725-1-git-send-email-blogic@openwrt.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1365751663-5725-1-git-send-email-blogic@openwrt.org>
Sender: linux-mips-bounce@linux-mips.org
Add a dtsi file for RT2880 SoC and a sample dts file. This SoC is first one that
was released in this SoC family.

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/ralink/Kconfig             |    4 ++
 arch/mips/ralink/dts/Makefile        |    1 +
 arch/mips/ralink/dts/rt2880.dtsi     |  116 ++++++++++++++++++++++++++++++++++
 arch/mips/ralink/dts/rt2880_eval.dts |   52 +++++++++++++++
 4 files changed, 173 insertions(+)
 create mode 100644 arch/mips/ralink/dts/rt2880.dtsi
 create mode 100644 arch/mips/ralink/dts/rt2880_eval.dts

diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 6723b94..0d312fc 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -26,6 +26,10 @@ choice
        config DTB_RT_NONE
                bool "None"
 
+       config DTB_RT2880_EVAL
+               bool "RT2880 eval kit"
+               depends on SOC_RT288X
+
        config DTB_RT305X_EVAL
                bool "RT305x eval kit"
                depends on SOC_RT305X
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
index 1a69fb3..f635a01 100644
--- a/arch/mips/ralink/dts/Makefile
+++ b/arch/mips/ralink/dts/Makefile
@@ -1 +1,2 @@
+obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
 obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
new file mode 100644
index 0000000..b57b2bd
--- /dev/null
+++ b/arch/mips/ralink/dts/rt2880.dtsi
@@ -0,0 +1,116 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ralink,rt2880-soc";
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips4KEc";
+               };
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 init=/init";
+       };
+
+       cpuintc: cpuintc@0 {
+               #address-cells = <0>;
+               #interrupt-cells = <1>;
+               interrupt-controller;
+               compatible = "mti,cpu-interrupt-controller";
+       };
+
+       palmbus@10000000 {
+               compatible = "palmbus";
+               reg = <0x10000000 0x200000>;
+                ranges = <0x0 0x10000000 0x1FFFFF>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysc@300000 {
+                       compatible = "ralink,rt2880-sysc";
+                       reg = <0x300000 0x100>;
+               };
+
+               timer@300100 {
+                       compatible = "ralink,rt2880-timer";
+                       reg = <0x300100 0x20>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <1>;
+
+                       status = "disabled";
+               };
+
+               watchdog@300120 {
+                       compatible = "ralink,rt2880-wdt";
+                       reg = <0x300120 0x10>;
+               };
+
+               intc: intc@300200 {
+                       compatible = "ralink,rt2880-intc";
+                       reg = <0x300200 0x100>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpuintc>;
+                       interrupts = <2>;
+               };
+
+               memc@300300 {
+                       compatible = "ralink,rt2880-memc";
+                       reg = <0x300300 0x100>;
+               };
+
+               gpio0: gpio@300600 {
+                       compatible = "ralink,rt2880-gpio";
+                       reg = <0x300600 0x34>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <24>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               20 24 28 2c
+                                               30 34 ];
+               };
+
+               gpio1: gpio@300638 {
+                       compatible = "ralink,rt2880-gpio";
+                       reg = <0x300638 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <16>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+               };
+
+               gpio2: gpio@300660 {
+                       compatible = "ralink,rt2880-gpio";
+                       reg = <0x300660 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <32>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+               };
+
+               uartlite@300c00 {
+                       compatible = "ralink,rt2880-uart", "ns16550a";
+                       reg = <0x300c00 0x100>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <8>;
+
+                       reg-shift = <2>;
+               };
+       };
+};
diff --git a/arch/mips/ralink/dts/rt2880_eval.dts 
b/arch/mips/ralink/dts/rt2880_eval.dts
new file mode 100644
index 0000000..c2710c1
--- /dev/null
+++ b/arch/mips/ralink/dts/rt2880_eval.dts
@@ -0,0 +1,52 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
+       model = "Ralink RT2880 evaluation board";
+
+       memory@8000000 {
+               reg = <0x0 0x2000000>;
+       };
+
+       palmbus@10000000 {
+               sysc@300000 {
+                       ralink,pinmux = "uartlite", "spi";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <0>;
+               };
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+
+               bank-width = <2>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "uboot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+               partition@30000 {
+                       label = "uboot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+               partition@40000 {
+                       label = "calibration";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+               partition@50000 {
+                       label = "linux";
+                       reg = <0x50000 0x7b0000>;
+               };
+       };
+};
-- 
1.7.10.4


<Prev in Thread] Current Thread [Next in Thread>