linux-mips
[Top] [All Lists]

[PATCH 08/18] MIPS: ralink: add RT5350 dtsi file

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH 08/18] MIPS: ralink: add RT5350 dtsi file
From: John Crispin <blogic@openwrt.org>
Date: Wed, 10 Apr 2013 13:47:17 +0200
Cc: Gabor Juhos <juhosg@openwrt.org>, linux-mips@linux-mips.org, John Crispin <blogic@openwrt.org>
In-reply-to: <1365594447-13068-1-git-send-email-blogic@openwrt.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Original-recipient: rfc822;linux-mips@linux-mips.org
References: <1365594447-13068-1-git-send-email-blogic@openwrt.org>
Sender: linux-mips-bounce@linux-mips.org
Add a dtsi file for RT5350 Soc. This SoC is almost the same as RT3050 but has
OHCI/EHCI in favour of the Synopsis DWC2 core.

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/ralink/dts/rt5350.dtsi |  181 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 181 insertions(+)
 create mode 100644 arch/mips/ralink/dts/rt5350.dtsi

diff --git a/arch/mips/ralink/dts/rt5350.dtsi b/arch/mips/ralink/dts/rt5350.dtsi
new file mode 100644
index 0000000..9ca95a3
--- /dev/null
+++ b/arch/mips/ralink/dts/rt5350.dtsi
@@ -0,0 +1,181 @@
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "ralink,rt5350-soc";
+
+       cpus {
+               cpu@0 {
+                       compatible = "mips,mips24KEc";
+               };
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600 init=/init";
+       };
+
+       cpuintc: cpuintc@0 {
+               #address-cells = <0>;
+               #interrupt-cells = <1>;
+               interrupt-controller;
+               compatible = "mti,cpu-interrupt-controller";
+       };
+
+       palmbus@10000000 {
+               compatible = "palmbus";
+               reg = <0x10000000 0x200000>;
+               ranges = <0x0 0x10000000 0x1FFFFF>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysc@0 {
+                       compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc";
+                       reg = <0x0 0x100>;
+               };
+
+               timer@100 {
+                       compatible = "ralink,rt5350-timer", 
"ralink,rt2880-timer";
+                       reg = <0x100 0x20>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <1>;
+
+                       status = "disabled";
+               };
+
+               watchdog@120 {
+                       compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt";
+                       reg = <0x120 0x10>;
+               };
+
+               intc: intc@200 {
+                       compatible = "ralink,rt5350-intc", "ralink,rt2880-intc";
+                       reg = <0x200 0x100>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpuintc>;
+                       interrupts = <2>;
+               };
+
+               memc@300 {
+                       compatible = "ralink,rt5350-memc", "ralink,rt3050-memc";
+                       reg = <0x300 0x100>;
+               };
+
+               gpio0: gpio@600 {
+                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+                       reg = <0x600 0x34>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <24>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               20 24 28 2c
+                                               30 34 ];
+
+                       status = "disabled";
+               };
+
+               gpio1: gpio@638 {
+                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+                       reg = <0x638 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <16>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               gpio2: gpio@660 {
+                       compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+                       reg = <0x660 0x24>;
+
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       ralink,num-gpios = <12>;
+                       ralink,register-map = [ 00 04 08 0c
+                                               10 14 18 1c
+                                               20 24 ];
+
+                       status = "disabled";
+               };
+
+               spi@b00 {
+                       compatible = "ralink,rt5350-spi", "ralink,rt2880-spi";
+                       reg = <0xb00 0x100>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       status = "disabled";
+               };
+
+               uartlite@c00 {
+                       compatible = "ralink,rt5350-uart", 
"ralink,rt2880-uart", "ns16550a";
+                       reg = <0xc00 0x100>;
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <12>;
+
+                       reg-shift = <2>;
+               };
+       };
+
+       ethernet@10100000 {
+               compatible = "ralink,rt5350-eth", "ralink,rt3050-eth";
+               reg = <0x10100000 10000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <5>;
+
+               status = "disabled";
+       };
+
+       esw@10110000 {
+               compatible = "ralink,rt5350-esw", "ralink,rt3050-esw";
+               reg = <0x10110000 8000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <17>;
+
+               status = "disabled";
+       };
+
+       wmac@10180000 {
+               compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac";
+               reg = <0x10180000 40000>;
+
+               interrupt-parent = <&cpuintc>;
+               interrupts = <6>;
+
+               status = "disabled";
+       };
+
+       ehci@101c0000 {
+               compatible = "ralink,rt5350-ehci", "ehci-platform";
+               reg = <0x101c0000 0x1000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <18>;
+
+               status = "disabled";
+       };
+
+       ohci@101c1000 {
+               compatible = "ralink,rt5350-ohci", "ohci-platform";
+               reg = <0x101c1000 0x1000>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <18>;
+
+               status = "disabled";
+       };
+};
-- 
1.7.10.4


<Prev in Thread] Current Thread [Next in Thread>