2013.01.31. 12:59 keltezéssel, John Crispin írta:
> This adds the devicetree file that describes the rt305x evaluation kit.
>
> Signed-off-by: John Crispin <blogic@openwrt.org>
I hate to say this again, but the compatible strings should be extended.
> ---
> arch/mips/ralink/dts/rt305x.dts | 151
> +++++++++++++++++++++++++++++++++++++++
> arch/mips/ralink/rt305x.c | 4 +-
> 2 files changed, 153 insertions(+), 2 deletions(-)
> create mode 100644 arch/mips/ralink/dts/rt305x.dts
>
> diff --git a/arch/mips/ralink/dts/rt305x.dts b/arch/mips/ralink/dts/rt305x.dts
> new file mode 100644
> index 0000000..c7298f3
> --- /dev/null
> +++ b/arch/mips/ralink/dts/rt305x.dts
> @@ -0,0 +1,151 @@
> +/dts-v1/;
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "ralink,rt305x";
compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
Although if you have a unique model number for your evaluation board, it would
be better to use that in the first compatible string.
Also it would be good to include a model property into each machine's dts file.
I mean something similar to this:
model = "Ralink RT3052 evaluation board";
> +
> + cpus {
> + cpu@0 {
> + compatible = "mips,mips24KEc";
> + };
> + };
> +
> + memory@0 {
> + reg = <0x0 0x2000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,57600 init=/init";
> + };
> +
> + palmbus@10000000 {
> + compatible = "palmbus";
> + reg = <0x10000000 0x200000>;
> + ranges = <0x0 0x10000000 0x1FFFFF>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + sysc@0 {
> + compatible = "ralink,rt3052-sysc";
compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
> + reg = <0x0 0x100>;
> +
> + ralink,pinmmux = "uartlite", "spi";
> + ralink,uartmux = "gpio";
> + ralink,wdtmux = <0>;
> + };
> +
> + timer@100 {
> + compatible = "ralink,rt2880-wdt";
compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
> + reg = <0x100 0x100>;
> + };
> +
> + intc: intc@200 {
> + compatible = "ralink,rt2880-intc";
compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
> + reg = <0x200 0x100>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> +
> + memc@300 {
> + compatible = "ralink,rt3052-memc";
compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
> + reg = <0x300 0x100>;
> + };
> +
> + gpio0: gpio@600 {
> + compatible = "ralink,rt2880-gpio";
compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
> + reg = <0x600 0x34>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + ralink,ngpio = <24>;
> + ralink,regs = [ 00 04 08 0c
> + 20 24 28 2c
> + 30 34 ];
> + };
> +
> + gpio1: gpio@638 {
> + compatible = "ralink,rt2880-gpio";
compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
> + reg = <0x638 0x24>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + ralink,ngpio = <16>;
> + ralink,regs = [ 00 04 08 0c
> + 10 14 18 1c
> + 20 24 ];
> + };
> +
> + gpio2: gpio@660 {
> + compatible = "ralink,rt2880-gpio";
compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
> + reg = <0x660 0x24>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + ralink,ngpio = <12>;
> + ralink,regs = [ 00 04 08 0c
> + 10 14 18 1c
> + 20 24 ];
> + };
> +
> + spi@b00 {
> + compatible = "ralink,rt2880-spi";
compatible = "ralink,rt3052-spi", "ralink,rt2880-spi";
> + reg = <0xb00 0x100>;
> + };
> +
> + uartlite@c00 {
> + compatible = "ns16550a";
compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
> + reg = <0xc00 0x100>;
> +
> + interrupt-parent = <&intc>;
> + interrupts = <12>;
> +
> + reg-shift = <2>;
> + };
> +
> + fe@100000 {
> + compatible = "ralink,rt3052-fe";
compatible = "ralink,rt3052-esw", "ralink,rt3050-fe";
> + reg = <0x100000 0x10000>;
> + };
> +
> + esw@110000 {
> + compatible = "ralink,rt3052-esw";
compatible = "ralink,rt3052-esw", "ralink,rt3050-esw";
> + reg = <0x110000 0x8000>;
> + };
> + };
-Gabor
|