linux-mips
[Top] [All Lists]

[PATCH 1/3] Document: devicetree: add OF documents for MIPS interrupt co

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH 1/3] Document: devicetree: add OF documents for MIPS interrupt controller
From: John Crispin <blogic@openwrt.org>
Date: Thu, 31 Jan 2013 14:20:42 +0100
Cc: linux-mips@linux-mips.org, devicetree-discuss@lists.ozlabs.org, John Crispin <blogic@openwrt.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Sender: linux-mips-bounce@linux-mips.org
Signed-off-by: John Crispin <blogic@openwrt.org>
---
 Documentation/devicetree/bindings/mips/cpu_irq.txt |   47 ++++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/cpu_irq.txt

diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt 
b/Documentation/devicetree/bindings/mips/cpu_irq.txt
new file mode 100644
index 0000000..13aa4b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cpu_irq.txt
@@ -0,0 +1,47 @@
+MIPS CPU interrupt controller
+
+On MIPS the mips_cpu_intc_init() helper can be used to initialize the 8 CPU
+IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+With the irq_domain in place we can describe how the 8 IRQs are wired to the
+platforms internal interrupt controller cascade.
+
+Below is an example of a platform describing the cascade inside the devicetree
+and the code used to load it inside arch_init_irq().
+
+Required properties:
+- compatible : Should be "mti,cpu-interrupt-controller"
+
+Example devicetree:
+       cpu-irq: cpu-irq@0 {
+               #address-cells = <0>;
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+
+               compatible = "mti,cpu-interrupt-controller";
+       };
+
+       intc: intc@200 {
+               compatible = "ralink,rt2880-intc";
+               reg = <0x200 0x100>;
+
+               interrupt-controller;
+               #interrupt-cells = <1>;
+
+               interrupt-parent = <&cpu-irq>;
+               interrupts = <2>;
+       };
+
+
+Example platform irq.c:
+static struct of_device_id __initdata of_irq_ids[] = {
+       { .compatible = "mti,cpu-interrupt-controller", .data = 
mips_cpu_intc_init },
+       { .compatible = "ralink,rt2880-intc", .data = intc_of_init },
+       {},
+};
+
+void __init arch_init_irq(void)
+{
+       of_irq_init(of_irq_ids);
+}
-- 
1.7.10.4


<Prev in Thread] Current Thread [Next in Thread>