linux-mips
[Top] [All Lists]

[PATCH 06/13] MIPS: BCM63XX: add support for the on-chip OHCI controller

To: linux-mips@linux-mips.org
Subject: [PATCH 06/13] MIPS: BCM63XX: add support for the on-chip OHCI controller
From: Florian Fainelli <florian@openwrt.org>
Date: Mon, 28 Jan 2013 20:06:24 +0100
Cc: ralf@linux-mips.org, jogo@openwrt.org, mbizon@freebox.fr, cenerkee@gmail.com, linux-usb@vger.kernel.org, stern@rowland.harvard.edu, gregkh@linuxfoundation.org, blogic@openwrt.org, Florian Fainelli <florian@openwrt.org>
In-reply-to: <1359399991-2236-1-git-send-email-florian@openwrt.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
References: <1359399991-2236-1-git-send-email-florian@openwrt.org>
Sender: linux-mips-bounce@linux-mips.org
Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
driven by the ohci-platform generic driver by using specific power
on/off/suspend callback to manage clocks and hardware specific
configuration.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
 arch/mips/bcm63xx/Makefile                         |    2 +-
 arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
 .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
 3 files changed, 101 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h

diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index a085c2b..a2a501a 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,7 +1,7 @@
 obj-y          += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
                   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
                   dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-wdt.o \
-                  dev-usb-usbd.o usb-common.o
+                  dev-usb-ohci.o dev-usb-usbd.o usb-common.o
 obj-$(CONFIG_EARLY_PRINTK)     += early_printk.o
 
 obj-y          += boards/
diff --git a/arch/mips/bcm63xx/dev-usb-ohci.c b/arch/mips/bcm63xx/dev-usb-ohci.c
new file mode 100644
index 0000000..b33e397
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
@@ -0,0 +1,94 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_usb_priv.h>
+#include <bcm63xx_dev_usb_ohci.h>
+
+static struct resource ohci_resources[] = {
+       {
+               .start          = -1, /* filled at runtime */
+               .end            = -1, /* filled at runtime */
+               .flags          = IORESOURCE_MEM,
+       },
+       {
+               .start          = -1, /* filled at runtime */
+               .flags          = IORESOURCE_IRQ,
+       },
+};
+
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+
+static struct clk *usb_host_clock;
+
+static int bcm63xx_ohci_power_on(struct platform_device *pdev)
+{
+       usb_host_clock = clk_get(&pdev->dev, "usbh");
+       if (IS_ERR_OR_NULL(usb_host_clock))
+               return -ENODEV;
+
+       clk_prepare_enable(usb_host_clock);
+
+       bcm63xx_usb_priv_ohci_cfg_set();
+
+       return 0;
+}
+
+static void bcm63xx_ohci_power_off(struct platform_device *pdev)
+{
+       if (!IS_ERR_OR_NULL(usb_host_clock)) {
+               clk_disable_unprepare(usb_host_clock);
+               clk_put(usb_host_clock);
+       }
+}
+
+static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
+       .big_endian_desc        = 1,
+       .big_endian_mmio        = 1,
+       .no_big_frame_no        = 1,
+       .num_ports              = 1,
+       .power_on               = bcm63xx_ohci_power_on,
+       .power_off              = bcm63xx_ohci_power_off,
+       .power_suspend          = bcm63xx_ohci_power_off,
+};
+
+static struct platform_device bcm63xx_ohci_device = {
+       .name           = "ohci-platform",
+       .id             = -1,
+       .num_resources  = ARRAY_SIZE(ohci_resources),
+       .resource       = ohci_resources,
+       .dev            = {
+               .platform_data          = &bcm63xx_ohci_pdata,
+               .dma_mask               = &ohci_dmamask,
+               .coherent_dma_mask      = DMA_BIT_MASK(32),
+       },
+};
+
+int __init bcm63xx_ohci_register(void)
+{
+       if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
+               return -ENODEV;
+
+       ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
+       ohci_resources[0].end = ohci_resources[0].start;
+       ohci_resources[0].end += RSET_OHCI_SIZE - 1;
+       ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
+
+       return platform_device_register(&bcm63xx_ohci_device);
+}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h 
b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
new file mode 100644
index 0000000..518a04d
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_USB_OHCI_H_
+#define BCM63XX_DEV_USB_OHCI_H_
+
+int bcm63xx_ohci_register(void);
+
+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
-- 
1.7.10.4


<Prev in Thread] Current Thread [Next in Thread>