linux-mips
[Top] [All Lists]

[PATCH V2 10/10] MIPS: ralink: adds Kbuild files

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH V2 10/10] MIPS: ralink: adds Kbuild files
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jan 2013 19:04:02 +0100
Cc: linux-mips@linux-mips.org, John Crispin <blogic@openwrt.org>
In-reply-to: <1359309842-31925-1-git-send-email-blogic@openwrt.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
References: <1359309842-31925-1-git-send-email-blogic@openwrt.org>
Sender: linux-mips-bounce@linux-mips.org
Add the Kbuild symbols and Makefiles needed to actually build the ralink code
from this series

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/Kbuild.platforms    |    1 +
 arch/mips/Kconfig             |   19 ++++++++++++++++++-
 arch/mips/ralink/Kconfig      |   32 ++++++++++++++++++++++++++++++++
 arch/mips/ralink/Makefile     |   15 +++++++++++++++
 arch/mips/ralink/Platform     |   10 ++++++++++
 arch/mips/ralink/dts/Makefile |    1 +
 6 files changed, 77 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/ralink/Kconfig
 create mode 100644 arch/mips/ralink/Makefile
 create mode 100644 arch/mips/ralink/Platform
 create mode 100644 arch/mips/ralink/dts/Makefile

diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 91b9d69..9a73ce6 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -22,6 +22,7 @@ platforms += pmc-sierra
 platforms += pnx833x
 platforms += pnx8550
 platforms += powertv
+platforms += ralink
 platforms += rb532
 platforms += sgi-ip22
 platforms += sgi-ip27
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index daeafe2..e52ae2b 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -436,6 +436,22 @@ config POWERTV
        help
          This enables support for the Cisco PowerTV Platform.
 
+config RALINK
+       bool "Ralink based machines"
+       select CEVT_R4K
+       select CSRC_R4K
+       select BOOT_RAW
+       select DMA_NONCOHERENT
+       select IRQ_CPU
+       select USE_OF
+       select SYS_HAS_CPU_MIPS32_R1
+       select SYS_HAS_CPU_MIPS32_R2
+       select SYS_SUPPORTS_32BIT_KERNEL
+       select SYS_SUPPORTS_LITTLE_ENDIAN
+       select SYS_HAS_EARLY_PRINTK
+       select HAVE_MACH_CLKDEV
+       select CLKDEV_LOOKUP
+
 config SGI_IP22
        bool "SGI IP22 (Indy/Indigo2)"
        select FW_ARC
@@ -848,6 +864,7 @@ source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/powertv/Kconfig"
+source "arch/mips/ralink/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
@@ -1162,7 +1179,7 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
        int
-       default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
+       default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || 
RALINK_RT288X
        default "6" if MIPS_CPU_SCACHE
        default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || 
CPU_CAVIUM_OCTEON
        default "5"
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
new file mode 100644
index 0000000..a0b0197
--- /dev/null
+++ b/arch/mips/ralink/Kconfig
@@ -0,0 +1,32 @@
+if RALINK
+
+choice
+       prompt "Ralink SoC selection"
+       default SOC_RT305X
+       help
+         Select Ralink MIPS SoC type.
+
+       config SOC_RT305X
+               bool "RT305x"
+               select USB_ARCH_HAS_HCD
+               select USB_ARCH_HAS_OHCI
+               select USB_ARCH_HAS_EHCI
+
+endchoice
+
+choice
+       prompt "Devicetree selection"
+       default DTB_RT_NONE
+       help
+         Select the devicetree.
+
+       config DTB_RT_NONE
+               bool "None"
+
+       config DTB_RT305X_EVAL
+               bool "RT305x eval kit"
+               depends on SOC_RT305X
+
+endchoice
+
+endif
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
new file mode 100644
index 0000000..939757f
--- /dev/null
+++ b/arch/mips/ralink/Makefile
@@ -0,0 +1,15 @@
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.#
+# Makefile for the Ralink common stuff
+#
+# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+
+obj-y := prom.o of.o reset.o clk.o irq.o
+
+obj-$(CONFIG_SOC_RT305X) += rt305x.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-y += dts/
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
new file mode 100644
index 0000000..6babd65
--- /dev/null
+++ b/arch/mips/ralink/Platform
@@ -0,0 +1,10 @@
+#
+# Ralink SoC common stuff
+#
+core-$(CONFIG_RALINK)          += arch/mips/ralink/
+cflags-$(CONFIG_RALINK)                += 
-I$(srctree)/arch/mips/include/asm/mach-ralink
+
+#
+# Ralink RT305x
+#
+load-$(CONFIG_SOC_RT305X)      += 0xffffffff80000000
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
new file mode 100644
index 0000000..e2ce7b4
--- /dev/null
+++ b/arch/mips/ralink/dts/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_DTB_RT305X_EVAL) := rt305x.dtb.o
-- 
1.7.10.4


<Prev in Thread] Current Thread [Next in Thread>