Re: [PATCH] clk: add Loongson1B clock support

[Kelvin Cheung <keguang.zhang@gmail.com>]

2012/8/18 Belisko Marek <marek.belisko@gmail.com>

On Sat, Aug 18, 2012 at 12:55 PM, Kelvin Cheung <keguang.zhang@gmail.com> wrote:
> This adds clock support to Loongson1B SoC using the common clock
> infrastructure.
>
> Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
> ---
>  drivers/clk/Makefile   |    1 +
>  drivers/clk/clk-ls1x.c |  108 ++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 109 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/clk/clk-ls1x.c
>
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 5869ea3..018ec57 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_SOCFPGA)    += socfpga/
>  obj-$(CONFIG_PLAT_SPEAR)       += spear/
>  obj-$(CONFIG_ARCH_U300)                += clk-u300.o
>  obj-$(CONFIG_ARCH_INTEGRATOR)  += versatile/
> +obj-$(CONFIG_MACH_LOONGSON1)   += clk-ls1x.o
>
>  # Chip specific
>  obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
> diff --git a/drivers/clk/clk-ls1x.c b/drivers/clk/clk-ls1x.c
> new file mode 100644
> index 0000000..0aadf9d
> --- /dev/null
> +++ b/drivers/clk/clk-ls1x.c
> @@ -0,0 +1,108 @@
> +/*
> + * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/err.h>
> +#include <asm/mach-loongson1/loongson1.h>
> +
> +#include <loongson1.h>
> +
> +#define OSC    33
> +
> +static DEFINE_SPINLOCK(_lock);
> +
> +int ls1x_pll_clk_enable(struct clk_hw *hw)

^^^^static

OK, will do.
Thanks!
 

> +{
> +       return 0;
> +}
> +
> +void ls1x_pll_clk_disable(struct clk_hw *hw)

^^^^ also static

> +{
> +}
> +
> +static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
> +                                            unsigned long parent_rate)
> +{
> +       u32 pll, rate;
> +
> +       pll = __raw_readl(LS1X_CLK_PLL_FREQ);
> +       rate = ((12 + (pll & 0x3f)) * 1000000) +
> +               ((((pll >> 8) & 0x3ff) * 1000000) >> 10);
> +       rate *= OSC;
> +       rate >>= 1;
> +
> +       return rate;
> +}
> +
> +static const struct clk_ops ls1x_pll_clk_ops = {
> +       .enable = ls1x_pll_clk_enable,
> +       .disable = ls1x_pll_clk_disable,
> +       .recalc_rate = ls1x_pll_recalc_rate,
> +};
> +
> +static struct clk * __init clk_register_pll(struct device *dev,
> +        const char *name, const char *parent_name, unsigned long flags)
> +{
> +       struct clk_hw *hw;
> +       struct clk *clk;
> +       struct clk_init_data init;
> +
> +       /* allocate the divider */
> +       hw = kzalloc(sizeof(struct clk_hw), GFP_KERNEL);
> +       if (!hw) {
> +               pr_err("%s: could not allocate clk_hw\n", __func__);
> +               return ERR_PTR(-ENOMEM);
> +       }
> +
> +       init.name = name;
> +       init.ops = &ls1x_pll_clk_ops;
> +       init.flags = flags | CLK_IS_BASIC;
> +       init.parent_names = (parent_name ? &parent_name : NULL);
> +       init.num_parents = (parent_name ? 1 : 0);
> +       hw->init = &init;
> +
> +       /* register the clock */
> +       clk = clk_register(dev, hw);
> +
> +       if (IS_ERR(clk))
> +               kfree(hw);
> +
> +       return clk;
> +}
> +
> +void __init ls1x_clk_init(void)
> +{
> +       struct clk *clk;
> +
> +       clk = clk_register_pll(NULL, "pll_clk", NULL, CLK_IS_ROOT);
> +       clk_prepare_enable(clk);
> +
> +       clk = clk_register_divider(NULL, "cpu_clk", "pll_clk",
> +                       CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_CPU_SHIFT,
> +                       DIV_CPU_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
> +       clk_prepare_enable(clk);
> +       clk_register_clkdev(clk, "cpu", NULL);
> +
> +       clk = clk_register_divider(NULL, "ddr_clk", "pll_clk",
> +                       CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT,
> +                       DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
> +       clk_prepare_enable(clk);
> +       clk_register_clkdev(clk, "ddr", NULL);
> +       clk_register_clkdev(clk, "stmmaceth", NULL);
> +
> +       clk = clk_register_divider(NULL, "dc_clk", "pll_clk",
> +                       CLK_SET_RATE_PARENT, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
> +                       DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
> +       clk_prepare_enable(clk);
> +       clk_register_clkdev(clk, "dc", NULL);
> +       clk_register_clkdev(clk, "serial8250", NULL);
> +}
> --
> 1.7.1
>

> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

cheers,

marek

--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com

-- 
Best Regards!
Kelvin