linux-mips
[Top] [All Lists]

[PATCH] MIPS: lantiq: adds support for gptu timers

To: Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH] MIPS: lantiq: adds support for gptu timers
From: John Crispin <blogic@openwrt.org>
Date: Thu, 16 Aug 2012 14:31:02 +0200
Cc: linux-mips@linux-mips.org, John Crispin <blogic@openwrt.org>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
Sender: linux-mips-bounce@linux-mips.org
Lantiq socs have a General Purpose Timer Unit (GPTU). This driver allows us to
initialize the timers. The voice firmware needs these timers as a reference.

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/lantiq/xway/Makefile |    4 +-
 arch/mips/lantiq/xway/gptu.c   |  214 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 217 insertions(+), 1 deletions(-)
 create mode 100644 arch/mips/lantiq/xway/gptu.c

diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index 729ea9e..f37f6c5 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1 +1,3 @@
-obj-y := prom.o sysctrl.o clk.o reset.o dma.o
+obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o
+
+obj-$(CONFIG_NAND_XWAY) += nand.o
diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c
new file mode 100644
index 0000000..cbb56fc
--- /dev/null
+++ b/arch/mips/lantiq/xway/gptu.c
@@ -0,0 +1,214 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2012 Lantiq GmbH
+ */
+
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+
+#include <lantiq_soc.h>
+#include "../clk.h"
+
+/* the magic ID byte of the core */
+#define GPTU_MAGIC     0x59
+/* clock control register */
+#define GPTU_CLC       0x00
+/* id register */
+#define GPTU_ID                0x08
+/* interrupt node enable */
+#define GPTU_IRNEN     0xf4
+/* interrupt control register */
+#define GPTU_IRCR      0xf8
+/* interrupt capture register */
+#define GPTU_IRNCR     0xfc
+/* there are 3 identical blocks of 2 timers. calculate register offsets */
+#define GPTU_SHIFT(x)  (x % 2 ? 4 : 0)
+#define GPTU_BASE(x)   (((x >> 1) * 0x20) + 0x10)
+/* timer control register */
+#define GPTU_CON(x)    (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x00)
+/* timer auto reload register */
+#define GPTU_RUN(x)    (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x08)
+/* timer manual reload register */
+#define GPTU_RLD(x)    (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x10)
+/* timer count register */
+#define GPTU_CNT(x)    (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x18)
+
+/* GPTU_CON(x) */
+#define CON_CNT                BIT(2)
+#define CON_EDGE_ANY   (BIT(7) | BIT(6))
+#define CON_SYNC       BIT(8)
+#define CON_CLK_INT    BIT(10)
+
+/* GPTU_RUN(x) */
+#define RUN_SEN                BIT(0)
+#define RUN_RL         BIT(2)
+
+/* set clock to runmode */
+#define CLC_RMC                BIT(8)
+/* bring core out of suspend */
+#define CLC_SUSPEND    BIT(4)
+/* the disable bit */
+#define CLC_DISABLE    BIT(0)
+
+#define gptu_w32(x, y) ltq_w32((x), gptu_membase + (y))
+#define gptu_r32(x)    ltq_r32(gptu_membase + (x))
+
+enum gptu_timer {
+       TIMER1A = 0,
+       TIMER1B,
+       TIMER2A,
+       TIMER2B,
+       TIMER3A,
+       TIMER3B
+};
+
+static void __iomem *gptu_membase;
+static struct resource irqres[6];
+
+static irqreturn_t timer_irq_handler(int irq, void *priv)
+{
+       int timer = irq - irqres[0].start;
+       gptu_w32(1 << timer, GPTU_IRNCR);
+       return IRQ_HANDLED;
+}
+
+static void gptu_hwinit(void)
+{
+       gptu_w32(0x00, GPTU_IRNEN);
+       gptu_w32(0xff, GPTU_IRNCR);
+       gptu_w32(CLC_RMC | CLC_SUSPEND, GPTU_CLC);
+}
+
+static void gptu_hwexit(void)
+{
+       gptu_w32(0x00, GPTU_IRNEN);
+       gptu_w32(0xff, GPTU_IRNCR);
+       gptu_w32(CLC_DISABLE, GPTU_CLC);
+}
+
+static int gptu_enable(struct clk *clk)
+{
+       int ret = request_irq(irqres[clk->bits].start, timer_irq_handler,
+               IRQF_TIMER, "gtpu", NULL);
+       if (ret) {
+               pr_err("gptu: failed to request irq\n");
+               return ret;
+       }
+
+       gptu_w32(CON_CNT | CON_EDGE_ANY | CON_SYNC | CON_CLK_INT,
+               GPTU_CON(clk->bits));
+       gptu_w32(1, GPTU_RLD(clk->bits));
+       gptu_w32(gptu_r32(GPTU_IRNEN) | BIT(clk->bits), GPTU_IRNEN);
+       gptu_w32(RUN_SEN | RUN_RL, GPTU_RUN(clk->bits));
+       return 0;
+}
+
+static void gptu_disable(struct clk *clk)
+{
+       gptu_w32(0, GPTU_RUN(clk->bits));
+       gptu_w32(0, GPTU_CON(clk->bits));
+       gptu_w32(0, GPTU_RLD(clk->bits));
+       gptu_w32(gptu_r32(GPTU_IRNEN) & ~BIT(clk->bits), GPTU_IRNEN);
+       free_irq(irqres[clk->bits].start, NULL);
+}
+
+static inline void clkdev_add_gptu(struct device *dev, const char *con,
+                                                       unsigned int timer)
+{
+       struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+       clk->cl.dev_id = dev_name(dev);
+       clk->cl.con_id = con;
+       clk->cl.clk = clk;
+       clk->enable = gptu_enable;
+       clk->disable = gptu_disable;
+       clk->bits = timer;
+       clkdev_add(&clk->cl);
+}
+
+static int __devinit gptu_probe(struct platform_device *pdev)
+{
+       struct clk *clk;
+       struct resource *res;
+
+       if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 6) != 6) {
+               dev_err(&pdev->dev, "Failed to get IRQ list\n");
+               return -EINVAL;
+       }
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_err(&pdev->dev, "Failed to get resource\n");
+               return -ENOMEM;
+       }
+
+       /* remap gptu register range */
+       gptu_membase = devm_request_and_ioremap(&pdev->dev, res);
+       if (!gptu_membase) {
+               dev_err(&pdev->dev, "Failed to remap resource\n");
+               return -ENOMEM;
+       }
+
+       /* enable our clock */
+       clk = clk_get(&pdev->dev, NULL);
+       if (IS_ERR(clk)) {
+               dev_err(&pdev->dev, "Failed to get clock\n");
+               return -ENOENT;
+       }
+       clk_enable(clk);
+
+       /* power up the core */
+       gptu_hwinit();
+
+       /* the gptu has a ID register */
+       if (((gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) {
+               dev_err(&pdev->dev, "Failed to find magic\n");
+               gptu_hwexit();
+               return -ENAVAIL;
+       }
+
+       /* register the clocks */
+       clkdev_add_gptu(&pdev->dev, "timer1a", TIMER1A);
+       clkdev_add_gptu(&pdev->dev, "timer1b", TIMER1B);
+       clkdev_add_gptu(&pdev->dev, "timer2a", TIMER2A);
+       clkdev_add_gptu(&pdev->dev, "timer2b", TIMER2B);
+       clkdev_add_gptu(&pdev->dev, "timer3a", TIMER3A);
+       clkdev_add_gptu(&pdev->dev, "timer3b", TIMER3B);
+
+       dev_info(&pdev->dev, "gptu: 6 timers loaded\n");
+
+       return 0;
+}
+
+static const struct of_device_id gptu_match[] = {
+       { .compatible = "lantiq,gptu-xway" },
+       {},
+};
+MODULE_DEVICE_TABLE(of, dma_match);
+
+static struct platform_driver dma_driver = {
+       .probe = gptu_probe,
+       .driver = {
+               .name = "gptu-xway",
+               .owner = THIS_MODULE,
+               .of_match_table = gptu_match,
+       },
+};
+
+int __init gptu_init(void)
+{
+       int ret = platform_driver_register(&dma_driver);
+
+       if (ret)
+               pr_info("gptu: Error registering platform driver\n");
+       return ret;
+}
+
+arch_initcall(gptu_init);
-- 
1.7.9.1


<Prev in Thread] Current Thread [Next in Thread>
  • [PATCH] MIPS: lantiq: adds support for gptu timers, John Crispin <=