linux-mips
[Top] [All Lists]

[PATCH 08/12] MIPS: Netlogic: Move serial ports to device tree

To: linux-mips@linux-mips.org, ralf@linux-mips.org
Subject: [PATCH 08/12] MIPS: Netlogic: Move serial ports to device tree
From: "Jayachandran C" <jayachandranc@netlogicmicro.com>
Date: Fri, 13 Jul 2012 21:53:21 +0530
Cc: "Jayachandran C" <jayachandranc@netlogicmicro.com>
In-reply-to: <1342196605-4260-1-git-send-email-jayachandranc@netlogicmicro.com>
List-archive: <http://www.linux-mips.org/archives/linux-mips/>
List-help: <mailto:ecartis@linux-mips.org?Subject=help>
List-id: linux-mips <linux-mips.eddie.linux-mips.org>
List-owner: <mailto:ralf@linux-mips.org>
List-post: <mailto:linux-mips@linux-mips.org>
List-software: Ecartis version 1.0.0
List-subscribe: <mailto:ecartis@linux-mips.org?subject=subscribe%20linux-mips>
List-unsubscribe: <mailto:ecartis@linux-mips.org?subject=unsubscribe%20linux-mips>
References: <1342196605-4260-1-git-send-email-jayachandranc@netlogicmicro.com>
Sender: linux-mips-bounce@linux-mips.org
Add the serial ports to the device tree and remove the platform
code for adding them.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
---
 arch/mips/netlogic/dts/xlp_evp.dts |   21 +++++++
 arch/mips/netlogic/xlp/Makefile    |    2 +-
 arch/mips/netlogic/xlp/platform.c  |  108 ------------------------------------
 3 files changed, 22 insertions(+), 109 deletions(-)
 delete mode 100644 arch/mips/netlogic/xlp/platform.c

diff --git a/arch/mips/netlogic/dts/xlp_evp.dts 
b/arch/mips/netlogic/dts/xlp_evp.dts
index 86a29ca..e14f423 100644
--- a/arch/mips/netlogic/dts/xlp_evp.dts
+++ b/arch/mips/netlogic/dts/xlp_evp.dts
@@ -22,6 +22,27 @@
                compatible = "simple-bus";
                ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
                          1 0  0 0x16000000  0x01000000>; // GBU chipselects
+
+               serial0: serial@30000 {
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0 0x30100 0xa00>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clock-frequency = <133333333>;
+                       interrupt-parent = <&pic>;
+                       interrupts = <17>;
+               };
+               serial1: serial@31000 {
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0 0x31100 0xa00>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clock-frequency = <133333333>;
+                       interrupt-parent = <&pic>;
+                       interrupts = <18>;
+               };
                i2c0: ocores@32000 {
                        compatible = "opencores,i2c-ocores";
                        #address-cells = <1>;
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
index 5bd24b6..a84d6ed 100644
--- a/arch/mips/netlogic/xlp/Makefile
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -1,3 +1,3 @@
-obj-y                          += setup.o platform.o nlm_hal.o
+obj-y                          += setup.o nlm_hal.o
 obj-$(CONFIG_SMP)              += wakeup.o
 obj-$(CONFIG_USB)              += usb-init.o
diff --git a/arch/mips/netlogic/xlp/platform.c 
b/arch/mips/netlogic/xlp/platform.c
deleted file mode 100644
index 2c510d5..0000000
--- a/arch/mips/netlogic/xlp/platform.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/pci.h>
-#include <linux/serial_reg.h>
-#include <linux/spinlock.h>
-
-#include <asm/time.h>
-#include <asm/addrspace.h>
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/pic.h>
-#include <asm/netlogic/xlp-hal/uart.h>
-
-static unsigned int nlm_xlp_uart_in(struct uart_port *p, int offset)
-{
-       return nlm_read_reg(p->iobase, offset);
-}
-
-static void nlm_xlp_uart_out(struct uart_port *p, int offset, int value)
-{
-       nlm_write_reg(p->iobase, offset, value);
-}
-
-#define PORT(_irq)                                     \
-       {                                               \
-               .irq            = _irq,                 \
-               .regshift       = 2,                    \
-               .iotype         = UPIO_MEM32,           \
-               .flags          = (UPF_SKIP_TEST|UPF_FIXED_TYPE|\
-                                       UPF_BOOT_AUTOCONF),     \
-               .uartclk        = XLP_IO_CLK,           \
-               .type           = PORT_16550A,          \
-               .serial_in      = nlm_xlp_uart_in,      \
-               .serial_out     = nlm_xlp_uart_out,     \
-       }
-
-static struct plat_serial8250_port xlp_uart_data[] = {
-       PORT(PIC_UART_0_IRQ),
-       PORT(PIC_UART_1_IRQ),
-       {},
-};
-
-static struct platform_device uart_device = {
-       .name           = "serial8250",
-       .id             = PLAT8250_DEV_PLATFORM,
-       .dev = {
-               .platform_data = xlp_uart_data,
-       },
-};
-
-static int __init nlm_platform_uart_init(void)
-{
-       unsigned long mmio;
-
-       mmio = (unsigned long)nlm_get_uart_regbase(0, 0);
-       xlp_uart_data[0].iobase = mmio;
-       xlp_uart_data[0].membase = (void __iomem *)mmio;
-       xlp_uart_data[0].mapbase = mmio;
-
-       mmio = (unsigned long)nlm_get_uart_regbase(0, 1);
-       xlp_uart_data[1].iobase = mmio;
-       xlp_uart_data[1].membase = (void __iomem *)mmio;
-       xlp_uart_data[1].mapbase = mmio;
-
-       return platform_device_register(&uart_device);
-}
-
-arch_initcall(nlm_platform_uart_init);
-- 
1.7.9.5



<Prev in Thread] Current Thread [Next in Thread>