[PATCH 0/4] netdev/phy: 10G PHY support.

[David Daney <ddaney.cavm@gmail.com>]

From: David Daney <david.daney@cavium.com>

The existing PHY driver infrastructure supports IEEE 802.3 Clause 22
PHYs used with 10/100/1000MB Ethernet.  For 10G Ethernet, many PHYs
use 802.3 Clause 45.  These patches attempt to add core support for
this as well as a driver for BCM87XX 10G PHY devices.

This is reworked from patches I send about 9 months ago:

http://marc.info/?l=linux-netdev&m=131844282403852

Several of the patches have device tree bindings in them, so the
device tree people get to enjoy them too.

David Daney (4):
  netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs
  netdev/phy/of: Handle IEEE802.3 clause 45 Ethernet PHYs in
    of_mdiobus_register()
  netdev/phy/of: Add more methods for binding PHY devices to drivers.
  netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs

 .../devicetree/bindings/net/broadcom-bcm87xx.txt   |   29 +++
 Documentation/devicetree/bindings/net/phy.txt      |   12 +-
 drivers/net/phy/Kconfig                            |    5 +
 drivers/net/phy/Makefile                           |    1 +
 drivers/net/phy/bcm87xx.c                          |  239 ++++++++++++++++++++
 drivers/net/phy/mdio_bus.c                         |    7 +
 drivers/net/phy/phy_device.c                       |  110 +++++++++-
 drivers/of/of_mdio.c                               |   14 +-
 include/linux/phy.h                                |   32 +++-
 9 files changed, 436 insertions(+), 13 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
 create mode 100644 drivers/net/phy/bcm87xx.c

-- 
1.7.2.3