[PATCH 08/14] MIPS: lantiq: clear all irqs properly on boot

[John Crispin <blogic@openwrt.org>]

Due to a wrongly placed bracket, the irq modules were not properly reset on
boot.

Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/lantiq/irq.c |   11 ++++++-----
 1 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index d673731..b6b1c72 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -271,12 +271,13 @@ void __init arch_init_irq(void)
        if (!ltq_eiu_membase)
                panic("Failed to remap eiu memory");
 
-       /* make sure all irqs are turned off by default */
-       for (i = 0; i < 5; i++)
+       /* turn off all irqs by default */
+       for (i = 0; i < 5; i++) {
+               /* make sure all irqs are turned off by default */
                ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET));
-
-       /* clear all possibly pending interrupts */
-       ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
+               /* clear all possibly pending interrupts */
+               ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
+       }
 
        mips_cpu_irq_init();
 
-- 
1.7.9.1