linux-mips
[Top] [All Lists]

[PATCH] [trivial] mips: Fix typo in mips

To: linux-mips@linux-mips.org
Subject: [PATCH] [trivial] mips: Fix typo in mips
From: Masanari Iida <standby24x7@gmail.com>
Date: Tue, 3 Apr 2012 21:01:45 +0900
Cc: trivial@kernel.org, linux-kernel@vger.kernel.org, Masanari Iida <standby24x7@gmail.com>, Ralf Baechle <ralf@linux-mips.org>
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=from:to:cc:subject:date:message-id:x-mailer; bh=OmAowsoKBYdtqANVRaFu3OqJ9T1GmGB++S0MxYkbkBI=; b=jbWSSCXaTniCcxDkId0lBTybfjRicuJtW0BI7ldpbuwbk4oK3eHRwdxFvxr5xBp11g 4sakt7VUJ88OtPc/ejVBqw4VRgNTg6cmTjDGlqe+mUv+/U/PFFxsneITsFHqpx83/oUw Le0CpdLzKylfDz16YAwqN1bZ/v3RdfxkJ96RRQrkSg0CaXnTNwL6ojIbEVuYKEluQwDS EY1p/wLd9Z77LE5ztyebIB7inkJh5weIG/dfTLYEDq4K4NjzO3KuxkxJO/Z7mBXQ/q4x xW26icj0zJPTZ87A3iDHF4egnkYHAzzPFBBpfmamaAOmvI04KGgF85O19AC+QX2iv/qX TSlg==
Sender: linux-mips-bounce@linux-mips.org
Correct spelling typo in printk messages, comments and macro.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                |    4 ++--
 arch/mips/Kconfig.debug          |    2 +-
 arch/mips/lantiq/xway/dma.c      |    6 +++---
 arch/mips/lantiq/xway/gpio.c     |    2 +-
 arch/mips/lantiq/xway/gpio_ebu.c |    2 +-
 arch/mips/lantiq/xway/gpio_stp.c |    2 +-
 arch/mips/pci/pci-lantiq.c       |    2 +-
 7 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ce30e2f..923a6c3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1001,12 +1001,12 @@ config HOLES_IN_ZONE
        bool
 
 #
-# Endianess selection.  Sufficiently obscure so many users don't know what to
+# Endianness selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a
 # choice statement should be more obvious to the user.
 #
 choice
-       prompt "Endianess selection"
+       prompt "Endianness selection"
        help
          Some MIPS machines can be configured for either little or big endian
          byte order. These modes require different kernels and a different
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 83ed00a..5a43aa0 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -57,7 +57,7 @@ config CMDLINE
          options.
 
 config CMDLINE_OVERRIDE
-       bool "Built-in command line overrides firware arguments"
+       bool "Built-in command line overrides firmware arguments"
        default n
        depends on CMDLINE_BOOL
        help
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index b210e93..d1eafb0 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -47,7 +47,7 @@
 #define DMA_CLK_DIV4           BIT(6)          /* polling clock divider */
 #define DMA_2W_BURST           BIT(1)          /* 2 word burst length */
 #define DMA_MAX_CHANNEL                20              /* the soc has 20 
channels */
-#define DMA_ETOP_ENDIANESS     (0xf << 8) /* endianess swap etop channels */
+#define DMA_ETOP_ENDIANNESS    (0xf << 8) /* endianness swap etop channels */
 #define DMA_WEIGHT     (BIT(17) | BIT(16))     /* default channel wheight */
 
 #define ltq_dma_r32(x)                 ltq_r32(ltq_dma_membase + (x))
@@ -197,10 +197,10 @@ ltq_dma_init_port(int p)
        switch (p) {
        case DMA_PORT_ETOP:
                /*
-                * Tell the DMA engine to swap the endianess of data frames and
+                * Tell the DMA engine to swap the endianness of data frames and
                 * drop packets if the channel arbitration fails.
                 */
-               ltq_dma_w32_mask(0, DMA_ETOP_ENDIANESS | DMA_PDEN,
+               ltq_dma_w32_mask(0, DMA_ETOP_ENDIANNESS | DMA_PDEN,
                        LTQ_DMA_PCTRL);
                break;
 
diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
index d2fa98f..c429a5b 100644
--- a/arch/mips/lantiq/xway/gpio.c
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -188,7 +188,7 @@ int __init ltq_gpio_init(void)
        int ret = platform_driver_register(&ltq_gpio_driver);
 
        if (ret)
-               pr_info("ltq_gpio : Error registering platfom driver!");
+               pr_info("ltq_gpio : Error registering platform driver!");
        return ret;
 }
 
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
index b91c7f1..aae1717 100644
--- a/arch/mips/lantiq/xway/gpio_ebu.c
+++ b/arch/mips/lantiq/xway/gpio_ebu.c
@@ -119,7 +119,7 @@ static int __init ltq_ebu_init(void)
        int ret = platform_driver_register(&ltq_ebu_driver);
 
        if (ret)
-               pr_info("ltq_ebu : Error registering platfom driver!");
+               pr_info("ltq_ebu : Error registering platform driver!");
        return ret;
 }
 
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
index ff9991c..fd07d87 100644
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -150,7 +150,7 @@ int __init ltq_stp_init(void)
        int ret = platform_driver_register(&ltq_stp_driver);
 
        if (ret)
-               pr_info("ltq_stp: error registering platfom driver");
+               pr_info("ltq_stp: error registering platform driver");
        return ret;
 }
 
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 030c77e..70fdf2c 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -297,7 +297,7 @@ int __init pcibios_init(void)
 {
        int ret = platform_driver_register(&ltq_pci_driver);
        if (ret)
-               printk(KERN_INFO "ltq_pci: Error registering platfom driver!");
+               printk(KERN_INFO "ltq_pci: Error registering platform driver!");
        return ret;
 }
 
-- 
1.7.10.rc3.11.gd8282


<Prev in Thread] Current Thread [Next in Thread>
  • [PATCH] [trivial] mips: Fix typo in mips, Masanari Iida <=